Outwater to Introduce Many New Woodworking Products at the 2014 International Woodworking Fair (IWF)

Outwater to Introduce Many New Woodworking Products at the 2014 International Woodworking Fair (IWF)


Bogota, NJ (PRWEB) August 19, 2014

With this year’s International Woodworking Fair set to take place from August 20th until August 23rd at the Georgia World Congress Center in Atlanta, GA, Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] will introduce many new woodworking products at the show to address and respond to the necessity for woodworkers to improve their operating efficiency and increase their revenue in a progressively more competitive marketplace.

The International Woodworking Fair, also known as IWF, is long established as the largest woodworking trade show in North America, and is geared towards assisting woodworkers, furniture and cabinet manufacturers and other industry related professionals in sourcing innovative and traditional woodworking products of all genres.

Outwater has chosen to highlight a few innovative products that are likely to garner significant attention and positive feedback at the show.

1) RF Dimmers

Now you’re in control! Unlike IR Dimmers, which require that they be utilized in close proximity with a direct line-of-sight to their paired, unobstructed IR Receivers, the radio frequencies of Outwater’s new RF Dimmers are omnidirectional and can travel over an extended range and effortlessly pass through walls or other barriers, permitting Outwater’s RF Receivers to be placed anywhere desired, such as in cabinets, bookcases, closets or other inconspicuous locations.

Available in three different formats to suit specific applications, Outwater’s RF Dimmers and Receivers are extremely cost effective and are manufactured using the highest quality components to ensure years of trouble free operation.

Afforded with a dimmer control knob (Varies by model), which smoothly rotates in discreet incremental steps, 12V and 24V lighting can be readily and precisely regulated as desired with an effective range from 10% to 100% of illumination, and can be simply turned on or off with a light tap on the RF Dimmer’s control knob.

2) 120V RGB LED Brite Lite Flex

Just introduced as the first and only 120V RGB LED Ribbon Flex Lighting on the market, Outwater’s new 120V RGB LED Brite Lite Flex offers a kaleidoscope of colors that can be programmed to morph at variable speeds or to remain static on any color via its corresponding, 9 function RGB controller.

With no fixtures to hide, the highly flexible, diminutive physical contour of Outwater’s 120V RGB LED Brite Lite Flex can be easily cut every 19-in.and connected end-to-end via solder free, plug in connectors, and can be mounted in all of those “hard to light” areas, or virtually anyplace that could not be previously lit.

Additionally, low heat emissions and no generated UV radiation render Outwater’s 120V RGB LED Brite Lite Flex, with its IP67 rated waterproof cover (Totally protected against dust ingress and the effects of immersion in water between 15 cm and 1 meter) safe for indoor and outdoor use in a variety of commercial and residential applications in which the 120V RGB LED Brite Lite Flex might potentially be exposed to water or damp environments.

Noted for its tremendous versatility, Outwater’s 120V RGB LED Brite Lite Flex maintains consistent binning codes and color temperatures, consuming only a few watts per linear foot and has an approximate 35,000 hour bulb life.

Offered in 16-1/2-ft., 33-ft. and 164-ft. lengths, Outwater’s 120V RGB LED Brite Lite Flex is ideal for use in tasks in which longer runs of lighting are desired, with a continuous length up to 80-ft. that can be powered via the multifunction RGB controller.

Complementary connectors, end caps and mounting clips along with a selection of LED Ribbon Mounting Channels readily enable a host of custom configurations and applications.

3) Plastic Channels for Economy & Standard 120V LED Brite Lite Flex

Intended for use with Outwater’s Economy and Standard 120V LED Brite Lite Flex, Outwater’s new 383-CL (Clear), 121-CL (Clear) and 121-SIL (Silver) PVC Plastic Channels readily enable cabinet and furniture manufacturers, lighting designers, contractors and electricians to inexpensively fabricate custom, aesthetically pleasing light fixtures without any prior experience either in the shop or right on the jobsite.

Sold in 12-ft. easy to cut lengths, Outwater’s Plastic Channels provide protective rigidity, affording 120V LED Brite Lite Flex with vital fortification to accommodate specific functions.

Link: 383-CL (Clear) Plastic Channel for use with Outwater’s Economy 120V LED Brite Lite Flex

Link: 121-CL (Clear) Plastic Channel for use with Outwater’s Standard 120V LED Brite Lite Flex

Link: 121-SIL (Silver) Plastic Channel for use with Outwater’s Standard 120V LED Brite Lite Flex

4) Standard 12V LED Ribbon Flex Light

Ideal for budget oriented applications, Outwater’s new 12V Standard Ribbon Flex Light may be low in cost, but offers all of the sought after features found on more expensive flexible ribbon lighting including consistent binning codes and color temperatures, in the field “cuttability,” end-to-end solder free “connectability,” approximately 50,000 hours of bulb life along with low heat emissions and no generated UV radiation, rendering safe indoor and outdoor commercial and residential use in damp environments, which is further bolstered by an IP65 rated waterproof cover (Totally protected against dust ingress with limited permitted low pressure water jets from any direction).

Available in both 8-1/4-ft. and 16-1/2-ft. coiled lengths with several LED Chip configurations offered in cool white and warm white, Outwater’s 12V Standard Ribbon Flex Light is constructed with two DC 5.5 female ends, enabling it to be cut to size every 1-in. or 1-7/8-in. (Varies by model) while allowing for any remaining portion of unused lighting to be employed for another project.

5) Economy T5 LED Lighting

Now, for the first time, one can finally purchase a high quality T5 LED light fixture for less than the cost of T5 fluorescent lighting!

Comparable in size and appearance to a T5 fluorescent light with the functionality of a fixture, Outwater’s new, fully dimmable Economy T5 LED Lighting is priced as low as $ 9.00 for a 3-ft. and $ 12.00 for a 4-ft. light fixture, and is one of the most energy efficient and cost effective LED lights on the market.

Very slim and easy to hide, Outwater’s Economy T5 LED Lighting comprises a sturdy housing with a frosted lens that can be readily mounted to wood, metal or glass for use in various applications, such as in showcases, under cabinets, store fixtures and wall units.

Available in cool white and warm white, Outwater’s Economy T5 LED Lighting is offered in different sizes and comes complete with desirable accessories to expedite its “out of the box” installation and enhance its usage.

Featuring consistent binning codes and color temperatures along with a significant bulb life ensures exceptional, long lasting operation without compromise.

6) L-Task-8F Profile for 120V LED Brite Lite Flex Double D-Lite

Create with Task-8! Intended for use with Outwater’s newly introduced 120V LED Brite Lite Flex Double D-Lite, Outwater’s new L- Task-8F LED Aluminum Channel comes complete with everything needed to easily create and mount a custom lighting fixture using Outwater’s 120V LED Brite Lite Flex Double D-Lite, and comprises precisely engineered surface angles and a snap on, impact resistant, frosted polycarbonate diffuser lens to ensure even illumination without any scalloping or hot spots.

Offered in an easy-to-cut 8-ft. length, Outwater’s L- Task-8F LED Aluminum Channel not only provides tremendous design opportunities for a breadth of made to order applications, it is also great for dissipating longevity robbing heat from LEDs by also functioning as a heat sink, thus prolonging the life and lumen output of Outwater’s 120V LED Brite Lite Flex Double D-Lite’s LEDs many times over.

7) 120V LED Brite Lite Flex Double D-Lite

Just introduced as the counterpart to the only other 120V flexible ribbon light on the market, Outwater’s new, dimmable 120V LED Brite Lite Flex Double D-Lite employs a double row of 5060 chips that provide approximately 40,000 hours of use with consistent binning codes and color temperatures, and generate super bright light with an extraordinarily high output of up to 800 lumens per foot.

Because no transformers are required to power Outwater’s 120 V LED Brite Lite Flex Double D-Lite, an unprecedented, continuous length up to 82-½ ft., which can be cut every 19-in. and connected end-to-end in the field via solder free, plug in connectors, can be run via an available single attached AC power cord.

Outwater’s 120 V LED Brite Lite Flex Double D-Lite is IP67 rated (Totally protected against dust ingress and the effects of immersion in water between 15 cm and 1 meter), produces low heat emissions and no generated UV radiation, and is intended for commercial and residential use in damp environments with Outwater’s new L- Task-8F LED Aluminum Channel.

8) PDC-96 120V Power Distribution Center

Optimal operating efficiency without any interruption to slow one down is absolutely crucial in today’s workplace. However, overlooked peripherals are often accountable for reduced productivity.

UL Listed for safe use in commercial or residential environments, Outwater’s new PDC-96 120V Power Distribution Center comprises an indispensable connection interface via an incorporated pass through USB port for data transmission along with two self-powered USB ports and an AC outlet to charge and supply uninterrupted current to one’s computer and other standalone, power hungry electronic devices.    

Manufactured with industrial grade components contained within the unit’s compact, black ABS plastic housing, Outwater’s PDC-96 120V Power Distribution Center includes an attached heavy duty SJT 4 AWG 3C power cord and easily installs via integrated spring clips.

9) LED Slide-N-Hide Electrical Cable and Wire Cover Extrusion

Outwater provides the perfect solution to messy wire and cable clutter with the introduction of its LED Slide-N-Hide Extrusion, a new, low profile, adhesive backed electrical cable and wire cover designed to unify, protect and conceal low-voltage cables and wires up to 22-gauge, such as those used to power LED Ribbon Lighting.

Easy to adhere to furniture, walls, baseboards and ceilings without drilling, nailing or stapling, Outwater’s polycarbonate LED Slide-N-Hide Extrusion is offered in white 18-in. lengths which can be cut and measures a scant 7/8-in. wide x ¼-in. high.

10) Barn Door Hardware

Outwater’s new line of Barn Door Hardware discriminatingly fuses superior construction and exceptional functionality with a refined aesthetic appeal that will elegantly blend into any traditional or contemporary setting in which it is utilized.

Offered as individual components in matte black, oil rubbed bronze and satin nickel powder coated finishes, Outwater’s Barn Door Hardware comprises solid, hardened aluminum rails and rail brackets along with steel roller straps, fasteners, center guides, door stops and rail splicers, which not only convey a true sense of substantial quality and heft unmatched by lesser, mass produced counterparts, Outwater’s Barn Door Hardware can support large doors weighing hundreds of pounds, and is certain to further one’s appreciation of the workmanship and materials used in its construction.

11) Woven Wire Grille Sample Kit

Outwater’s new Woven Wire Grille Sample Kit [Model #WWG-Kit] features its entire collection of Woven Wire Grilles, with more than 45 different patterns from which to choose in numerous designs, finishes and sizes, and is an invaluable, portable resource for furniture and cabinet manufacturers to readily showcase Outwater’s Woven Wire Grilles to their prospective customers.

Now offered at the reduced price of only $ 55.00, Outwater’s Woven Wire Grille Sample Kit is valued at $ 250.00, and is designed to benefit both furniture and cabinet manufacturers and their customers by providing potential customers with everything needed to facilitate purchasing decisions.        

Hand reproduced from original designs ranging from the English Country to the French Provincial Periods, Outwater’s Woven Wire Grilles provide the perfect decorative enhancement for furniture and cabinets from any era and are also available in custom sizes and finishes.

About Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC]:

Outwater can be contacted Toll Free at 1-800-631-8375 (for sales and product information in the USA & Canada) / 1-201-498-8750 (for sales and product information outside of the USA & Canada) or viewed online at http://www.outwater.com

Outwater was founded as a brick and mortar company in August 1972 on the premise to provide small and midsized furniture and cabinet manufacturers with a reliable source from whom they could purchase plastic extrusions in the amounts that reflected their actual requirements rather than the often substantial minimum quantities that were dictated by numerous manufacturers.

From the vendor of a single product line, Outwater, with sales and distribution facilities in New Jersey and Arizona, is established as an international manufacturer and distributor of more than 65,000 traditional and innovative products required by woodworkers, cabinet and furniture manufacturers, builders, remodelers, designers, architects, point-of-purchase and display fixturing manufacturers, OEM’s, as well as a diversified range of other commercial and retail customers.

Major Product Categories include Plastic & Aluminum Extrusions; Lighting and Lighting Accessories; Furniture, Cabinet & Store Fixture Components; Knobs & Pulls; Casters; Fasteners; Laminates; The Foga Exhibit & Display Fastening System; The Klem Connector; Literature Displays; Slatwall; Sign Holders; P.O.P Components; Display Motors & Turntables; Pedestals; Injection Molded Parts; Brass Tubing & Fittings; Surfacing Materials; Interior & Exterior Polymer & Wood Architectural Mouldings & Millwork; Orac Decor and DEM Architectural Mouldings & Millwork; Columns & Capitals; Balustrading; Wrought Iron Components; Decorative Stamped Steel & Polymer Ceiling Panels; Wainscoting; Wall Coverings; Fireplace Surrounds; Plastic “Glass” Block; Period & Contemporary Hardware; Kitchen & Bath Accessories; Kitchen & Bath Cabinetry and Vanities… and so much more!

Contact:

Joey Shimm, Director of Marketing

Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC

(201) 498-8750

###






Nice Precision Engineered Products photos

Nice Precision Engineered Products photos

A few nice precision engineered products images I found:

time for CHANGE …item 1.. Déjà Vu in Gaza? — This calls to mind the words of Mark Twain: (Nov 28, 2012 / 14 Kislev 5773) …item 2.. Cobblers, Crisps and Crumbles (Nov 29th, 2012) …

Image by marsmet546
We do not have the option of passively standing by. Israel is in real danger and we need everyone on board. The verse (2-Kings 3:27) implies that if our enemies show great devotion and self-sacrifice for their cause, that obligates us to do the same.

For the purpose of education and activism, here are four key points to know:
.

……..*****All images are copyrighted by their respective authors ……..
.

••• Your account (marsmet547) has been reviewed as unsafe by Flickr staff.

Remind yourself of our Content Filters and Community Guidelines to see what’s OK and what’s not on Flickr, and moderate your content accordingly.

.
.

… marsmet546 photostream … marsmet546 photo …

m.flickr.com/#/photos/90585146@N08/

Thursday, April 3, 2014

.

m.flickr.com/#/photos/90585146@N08/8222922317/

2014 – Black text on white backgroungd

.

View photo size … Large

m.flickr.com/#/photos/90585146@N08/8222922317/sizes/l/

.

m.flickr.com/#/activity/

.
.

… marsmet547 photo … King David – Absalom … The Indomitable Jewish Spirit (June 22, 2014 / 24 Sivan 5774) …item 2.. Bodies of three Jewish settlers who went missing near Hebron ‘found near West Bank city’ (30 June 2014) …

m.flickr.com/#/photos/93623724@N08/14297226059/

2014 – Black text on white background
Thursday, April 3, 2014

.

… marsmet547 photostream … Page 1 …

www.flickr.com/photos/93623724@N08/?details=1

••• Your account (marsmet547) has been reviewed as unsafe by Flickr staff.

.
.

… marsmet547 … Flickr Search …

www.flickr.com/search/?details=1&q=marsmet547

.
.

……………………………………………………………………………………………………………………………………………………………………..
.
…..item 1)…. Déjà Vu in Gaza? …

… aish.com … www.aish.com/jw/mo

HOME ISRAEL MEDIA OBJECTIVITY
Déjà Vu in Gaza?

Four key take-aways from Operation Pillar of Defense.
.
…………………………

img code photo … Déjà Vu in Gaza?

media.aish.com/images/DejaVuInGaza230x150-EN.jpg

…………………………
.

by Rabbi Shraga Simmons
Nov 28, 2012 / 14 Kislev 5773

www.aish.com/jw/mo/Deja-Vu-in-Gaza.html

It’s all so eerily familiar. A war that began a few weeks after Barack Obama’s presidential election. Gazans had been raining hundreds of Qassam rockets onto southern Israeli towns, along with long-range missiles supplied by the mad mullahs of Iran. With just 15 seconds to run into a shelter before impact, the rockets sowed panic in streets and schools. The danger reached ludicrous proportions and it was time to stop playing Islamic Roulette.

Four years ago, Israel launched “Operation Cast lead” to stop the rockets from Gaza. Now here we are again, this time with Operation Pillar of Defense (Amud Anan). Little has changed. On the heels of a U.S. presidential election, nearly 500 rockets have struck Israel from Gaza. One million Israelis are living in bomb shelters and Iranian-made Fajir missiles have put Tel Aviv, Jerusalem, and 50 percent of Israel’s population within striking range.

Israel’s Iron Dome anti-missile system has successfully intercepted another 250 rockets. Yet the system is not fool-proof; dozens of Israelis have been injured and three civilians were killed when a Hamas rocket hit their home in the town of Kiryat Malachi.

Europeans fear their own capitals may one day be the target.

For now, people of good will are backing Israel’s right to self-defense. The U.S. Senate unanimously passed a resolution in support of Israel, and the U.S. State Department – with a historically Arabist bent – was unequivocal: “The onus is on Hamas to stop its rocket attacks." Even traditionally hostile Europeans – perhaps fearing that their own capitals may one day be similarly targeted – are affirming “Israel’s right to live without fear of attack."

For its part, Israel has decimated over 100 rocket production and launching facilities in Gaza. As well, Israel eliminated arch-terrorist Ahmed Jabari, the commander-in-chief of Hamas terror activity who directed a decade of rockets, bombings, and the kidnapping of Gilad Shalit.

Where all this will end is a terrifying unknown. The Middle East is far more volatile than it was four years ago: Syria is immersed in a bloody civil war; Hizbollah positions have been strengthened in Lebanon; Egypt is now run by the Muslim Brotherhood; anti-government riots have erupted in Jordan; and Iran is four years closer to possessing an atomic bomb.
.

—– What can we do?

… 1. Stay informed, and redouble efforts to assist Israel’s PR effort.
… 2. Strengthen our commitment to Jewish values.
… 3. Pray for the welfare of Israeli soldiers and all of Israel’s citizens.
.

We do not have the option of passively standing by. Israel is in real danger and we need everyone on board. The verse (2-Kings 3:27) implies that if our enemies show great devotion and self-sacrifice for their cause, that obligates us to do the same.

For the purpose of education and activism, here are four key points to know:
.
.

….. (1) CNN reporter shills as a mouthpiece for jihadist terror.

For media monitors, CNN has long been the gargoyle in an already-ugly media crowd. In a variety of ways – whether it’s CNN founder Ted Turner labeling Israeli defensive actions "terror"; or CNN’s Senior Editor of Mideast Affairs, Octavia Nasr, expressing her sadness over the passing of a Hezbollah terror leader; or Palestinian spokeswoman Diana Buttu asserting unchallenged on CNN that Qassam rockets (with their 7,000 metal ball bearings and 20 pounds of TNT) contain “no explosive warhead” – CNN too often seems on the cusp of pro-Palestinian activism.

This time around, CNN seems headed down the same path. A video report by Zain Verjee, the London-based anchor of CNN’s World Report, sounds like she’d be more comfortable on Hamas TV, as she discards all semblance of objectivity and assumes the role of disdainful challenger. Note specifically:

.. 0:57 – "How do these air strikes bring peace and quiet?"
.. 2:00 – "Fifteen children are wounded – these aren’t targeted operations!"
.. 3:46 – “Aren’t you making an already bad situation worse?”

The good news is that Israel has a superb spokesman in Mark Regev, a native of Australia who displays remarkable articulation and composure in the face of these CNN taunts. Keep your eye on CNN and in the meantime, click here to complain about Verjee’s horribly biased video report.
.
.

….. (2) Beyond rockets and planes, this is a Social Media war.
The days are over when terrorists disseminate their hatred via a spooky video cassette sent to Al Jazeera. Today, you can simply "follow" Hamas missile squads on Twitter’s @alqassambrigade, or surf www.qassam.ps where you even have the option of selecting your favorite color scheme. More nefariously, Palestinian rocket-launching teams now use Google Earth to select their civilian targets.

Israel has traditionally been behind the curve when it comes to public diplomacy – the infamous "hasbara." In trying to influence world opinion, the government’s standard mode has been a cacophony of competing – and sometimes contradictory – messages from various spokespeople in the Government Press Office, IDF, Foreign Ministry and Defense Ministry.

This time it’s different. Israel is prepared, quick, concise and – believe it or not – "media savvy." The Ministry of Public Diplomacy is coordinating an aggressive campaign under the banner, "Israel Under Fire."
.
……………………………….

img code photo … WHAT WOULD YOU DO ?

media.aish.com/images/Deja-social.jpg

……………………………….
.

The IDF has issued a series of successful viral campaigns, such as a Facebook graphic which depicts the Statue of Liberty and other international landmarks being swamped by missiles. The message: “What would you do?”

After killing terror chieftain Jabari, the IDF immediately posted a YouTube video of the targeted strike. It has been viewed 4 million times, sending an important message to three different audiences:
.

… A warning to militants in Gaza: "We can get you anywhere, anytime."
… An appeasing message to the Israeli public: "We will not remain helpless in the face of repeated rocket attacks."
… A reassurance to those concerned with collateral damage: "We can strike with utmost precision."
.

This is a genuine Social Media War. On the heels of the Jabari strike, IDF tweeted a direct warning to his Hamas comrades; Hamas then tweeted back its own threat:
.
………………………………..

img code photo … Tweet … IDF – 14 Nov 12 ….. Alqassam Brigades – 14 Nov 12

media.aish.com/images/Deja-tweet.jpg

………………………………..
.

Get involved. Follow the Israel Defense Forces at: Website, Facebook, Twitter, YouTube, Flickr. And most importantly: Share!
.
.

….. (3) Bias in the New York Times – what else is new?

The New York Times has dark stains going all the way back to the Holocaust, when its gross under-reporting of events crippled efforts to generate public support for helping to save millions of Jews.
Now in Gaza, the Times is playing loose with the facts. A Times editorial insists that Hamas "has mostly adhered to an informal cease-fire with Israel after the war there in the winter of 2008-09." Would someone please explain how that jives with the fact that Hamas launched 650 rocket attacks in 2011 and nearly 1,000 this year alone?

Meanwhile, Times’ correspondents Fares Akram and Isabel Kershner profess to be doubtful of events, saying that the Israeli military operation is “in response to what Israel called repeated rocket attacks.” In the eyes of the Times, the launching of hundreds of rockets from Gaza is not a fact, but rather “what Israel called repeated rocket attacks.”
.

The Times is also uncertain about the nature of Hamas, saying it is

“regarded by Israel as a terrorist group sworn to Israel’s destruction.”
.

According to the Times, only Israel regards Hamas as a terrorist group. Why does the Times ignore that Hamas is also listed as a terrorist group by the European Union, United States, Canada, Australia, Japan, and United Kingdom?

As for the assertion that Hamas is “regarded by Israel as … sworn to Israel’s destruction,” is the Times somehow unaware of the Hamas Charter which cites the destruction of Israel as its primary objective? Does the Times not believe Hamas foreign minister Mahmoud Zahar when he declares: "Nobody among our sons and grandsons will accept Israel as a legal state… Israel is a foreign body. Not in this generation, not in the next generation, will we accept it here"?

So far, we’ve at least been spared the fairy tales from the rocket barrage of four years ago when the Times published the Hamas claim that "We did not intentionally target civilians. We were targeting military bases, but the primitive weapons make mistakes."

This calls to mind the words of Mark Twain: While there are laws to protect freedom of the press, there are unfortunately none to protect people from the press.
.
.

….. (4) The Pallywood industry of false claims.

When it comes to civilians casualties, no one plays it like they do in Gaza. Jeffrey Goldberg of The Atlantic notes how Hamas "prevents the burial, or even preparation of the bodies for burial, until the bodies are used as props in the Palestinian Passion Play. Once, in Khan Younis [Gaza], I actually saw gunmen unwrap a shrouded body, carry it a hundred yards and position it atop a pile of rubble – and then wait a half-hour until photographers showed. It was one of the more horrible things I’ve seen in my life. And it’s typical of Hamas."

Hamas has taken the initiative in promoting fake casualties. On Twitter, @AlqassamBrigade uploaded the photo of a "Palestinian child wounded in an Israeli air strike.” Astute media monitors noted that in truth, the photo is of a child injured last month in the Syrian civil war.

Meanwhile, AFP/Getty issued a photo of a Palestinian man picking up a doll lying on shattered glass. Was this scene genuine? It’s possible. But with such a rare confluence of elements – the man’s hand a split second from the pristine doll perfectly positioned in the rubble – logic rejects the likelihood that the photojournalist "just happened" to be down on the floor in perfect position at the precise moment. It’s simply too good to be true.

In a classic case of “fauxtography,” BBC and others posted footage of a "badly injured" man being carried away to safety by five other men. Thirty seconds later the man is shown – miraculously – walking around, healthy as a lark. (See the clips here, and watch till 2:42.)

In the meantime, Hamas has been desperately fabricating achievements: falsely claiming to have hit Israel’s parliament in Jerusalem, to have struck down an Israeli drone, and to have killed several soldiers in a jeep.

Click here to receive Aish.com’s free weekly email.

To be sure, as Hamas registers more losses in the military confrontation and thus becomes more desperate to win the media war, we can expect more attempts to orchestrate events. As Professor Richard Landes has predicted:
.

Whether by Israeli accident or Hamas China engineering, expect a spectacular civilian massacre in the coming days, followed by an orgy of Pallywood photography, amplified by a compliant Western media, and even greater fury in the streets of the Muslim and Western world. It’s in the Hamas playbook.
.

Four years ago, the U.N. school in Jabalya, Gaza provided fodder for an alleged massacre (later disproven). This time, expect Hamas to hang on just long enough to score those coveted PR points. After all, events in Gaza appear to be happening all over again.
.
.

.
………………………………………………………………………………………………………………………………………………………………………
.
…..item 2)…. Cobblers, Crisps and Crumbles …

… ORTHODOX UNION … www.ou.org/life/food/recipes … Enhancing Jewish Life

By Eileen Goltz | Nov 29th, 2012 |

www.ou.org/life/food/recipes/cobblers-crisps-crumbles-eil…

Please note: Eileen Goltz is a freelance kosher food writer. The Orthodox Union makes no endorsements or representations regarding kashrut certification of various products/vendors referred to in her articles, blog or web site.

There are lots of rivalries in the Torah. We have Moses/Pharaoh (“Let my people go”), Jacob/Esau (“Brother, can you spare a bowl of lentils?”) and especially at this time of year with Chanukah and that whole Macabees/Greeks brouhaha. But I say, nah–that’s child’s play compared to what goes on in my kitchen when the cobbler comes up against the crisp and then winner faces off against anything chocolate.

These fruit-based desserts are truly American in origin. Just to be clear, a cobbler is a deep-dish fruit dessert with a thick top crust (typically a biscuit dough).
.
……………………………

img code photo … Crisps and crumbles

www.ou.org/life/files/iStock_000014396651XSmall-297×300.jpg

…………………………..
.

Crisps and crumbles are pretty much the same as a cobbler, only with a crumb topping. The combination for the topping is based on personal preference. You can mix and mingle shortening, flour, nuts, bread crumbs, cookie crumbs, graham cracker crumbs, or even crushed up breakfast cereal. And FYI–the crumble is just the English Isle’s version of a crisp.

As for which one of the following recipes is served after a plate full of latkes (potato pancakes), that’s up to you. Hopefully, you have just enough time to whip one up before they finish a no-holds-barred game of dreidel (spinning tops).

And if you need to substitute an apple for a pear for a peach, it’s all good.
.
.

—– PICK-AND-MIX A CRISP (dairy or pareve)

Servings: 6 – 8

Ingredients:

… 5 cups apples, pears, peaches, or apricots, peeled and sliced; or frozen unsweetened peach slices (don’t drain the frozen fruit if using it)

… 2 to 4 tablespoons sugar

… 1/2 cup regular rolled oats

… 1/2 cup packed brown sugar

… 1/4 cup flour

… 1/4 teaspoon ground nutmeg, ginger or cinnamon (your choice)

… 1/4 cup butter or margarine

… 1/4 cup chopped nuts or coconut or a mixture of both

Directions:

Preheat oven to 375. Place your fruit of choice in ungreased 2-quart square baking dish. Sprinkle the sugar over the top and mix to combine.

In a bowl combine the oats, brown sugar, flour and nutmeg, ginger, or cinnamon. Cut in butter or margarine until the mixture is combined and crumbly. Then add nuts and/or coconut and mix to combine.

Sprinkle the topping over the fruit. Bake for 30 to 35 minutes until fruit is tender but not mushy and topping is golden brown and bubbly.

Options for Pick-and-Mix:

Make a double batch of the crunchy oatmeal topping mixture and store the extra in a freezer bag. Seal, label and freeze it for up to 1 month.

Blueberry Crisp: For filling, mix 1/4 cup sugar with 3 tablespoons flour. Toss with 5 cups fresh or frozen unsweetened blueberries.

Cherry Crisp: For filling, mix 1/2 cup sugar, 3 tablespoons flour with 5 cups fresh or frozen unsweetened pitted tart red cherries.

Rhubarb Crisp: For filling, mix 3/4 cup sugar with 3 tablespoons flour. Add 5 cups fresh or frozen unsweetened sliced rhubarb.

Modified and submitted by Rene Onella of San Francisco, CA. Original source unknown.
.
.

—– BLUEBERRY CORNMEAL COBBLER (dairy or pareve)

Servings: 12

Directions:

… 4 cups fresh or frozen blueberries (don’t thaw if using frozen)

… 1 cup plus 2 tablespoons sugar

… 1 tablespoon quick-cooking tapioca

… 2 teaspoons grated lemon peel

… 1 teaspoon ground cinnamon

… 1/4 to 1/2 teaspoon ground nutmeg
.

>> Topping:
.

… 1/2 cup butter or margarine, softened, divided

… 1 cup powdered sugar

… 1 egg

… 1 cup flour

… 1/2 cup cornmeal

… 2 teaspoons baking powder

… 1/2 teaspoon baking soda

… 1/2 teaspoon salt

… 3/4 cup buttermilk or non-dairy substitute

… 2 tablespoons maple syrup (use the real stuff)

Directions:

Preheat oven to 375. Grease an 11 X7 baking dish and set it aside.

In a large bowl, combine the blueberries, sugar, tapioca, lemon peel, cinnamon and nutmeg. Let stand for 15 minutes. Pour into the prepared pan.

In a small bowl, combine 1/4 cup butter or margarine and powdered sugar. Add the egg and mix to combine.

Add the flour, cornmeal, baking powder, baking soda and salt to the creamed mixture alternately with the buttermilk or non-dairy substitute, mixing just until combined. Spoon the batter over berry mixture. Bake for 35-40 minutes or until a toothpick inserted near the center comes out clean.

In a small saucepan, melt remaining butter or margarine over low heat. Remove from the heat; stir in the syrup. Brush over corn bread. Broil 4-6 inches from the heat for 1-2 minutes or until bubbly. Serve warm.

Modified from a recipe from Judy Watson of Tipton, IN; Taste of Home, 2012.
.
.

—– PEAR AND CRANBERRY COBBLER (dairy or pareve)

Servings: 8 – 10

Ingredients:

>> Filling:

… 2 pounds firm Bartlett pears, peeled and cut into 1/2-inch wedges

… 1 2/3 cups fresh cranberries (6 ounces)

… 1 cup sugar

… 2 (1- by 3-inch) strips orange zest, finely chopped

… 1/4 cup red wine

… 1/4 teaspoon ground allspice

… 2 tablespoons unsalted butter or margarine, cut into bits
.

>> Biscuit topping:
.

… 1 1/2 cups flour

… 1 1/2 teaspoons baking powder

… rounded 1/4 teaspoon salt

… 1 cup heavy cream or non-dairy substitute, divided

… 1 teaspoon sugar

Directions:

Preheat oven to 425. Grease a 9X13 baking dish and set it aside.

In a bowl combine the pears, cranberries, sugar, orange zest, red wine and allspice. Spoon the mixture into the prepared pan and dot the top with the butter or margarine. Cover dish tightly with foil and bake 20 minutes. Remove foil and continue to bake until cranberries burst and pears are just tender, 15 to 20 minutes more.

While filling is cooking, make biscuits:

Stir together flour, baking powder, and salt in a bowl, then add 3/4 cup plus 3 tablespoons cream or non-dairy substitute and stir just until a dough forms. Gather dough into a ball and transfer to a lightly floured surface (dough will feel dense and heavy).

Gently knead dough 6 times, then pat out into an 8-inch round (about 1/3-inch thick).

Cut out as many rounds as possible with lightly floured cutter, transferring to a sheet of wax paper. Gather scraps and pat out once more, then cut out more rounds. You will have about 16 rounds.

Carefully but quickly, top hot fruit with biscuits, arranging in 1 layer. Brush biscuits with remaining tablespoon cream or non-dairy substitute and sprinkle with sugar.

Continue to bake cobbler until biscuits are puffed and golden, 15 to 20 minutes. Cool 15 minutes before serving.

Epicurious, November 2011, from a recipe by Shelley Wiseman.
.
.

—– SWEET POTATO COBBLER (dairy or pareve)

Ingredients:

>> Filling:

… 2 1/2 pounds sweet potatoes

… 1 quart water

… 3/4 cup corn syrup

… 1/2 cup packed brown sugar

… 1 teaspoon cinnamon

… 1/2 teaspoon ground allspice

… 1/4 teaspoon salt

… 2 tablespoons unsalted butter or margarine

… 1 teaspoon vanilla
.

>> Biscuit dough:
.

… 3 cups flour

… 4 teaspoons baking powder

… 3/4 teaspoon salt

… 3/4 stick (6 tablespoons) cold unsalted butter or margarine, cut into 1/2-inch cubes

… 1 1/4 cups milk or non-dairy substitute

Directions:

Peel sweet potatoes, then halve lengthwise and slice crosswise 1/4-inch thick. Combine potatoes with remaining filling ingredients in a wide 4- to 5-quart pot and simmer, covered, until potatoes are almost tender, 6 to 8 minutes.

Transfer potatoes with a slotted spoon to a bowl. Boil remaining liquid, uncovered, until reduced to about 2 cups (it will become syrupy), 20 to 25 minutes.

Make dough and bake cobbler:

Preheat oven to 375.

In a bowl combine the flour, baking powder, and salt. Cut in the butter or margarine until mixture resembles coarse meal. Stir in milk or non-dairy substitute with a fork until a dough forms.

Gather dough into a ball, then turn out onto a lightly floured surface and gently knead 7 or 8 times. Divide dough into 2 pieces, then form each into a disk.

Roll out 1 disk with a floured rolling pin into a 14-inch round (about 1/8 inch thick) and fit into bottom and about halfway up the sides of Dutch oven, pressing against the sides to help it adhere.

Roll out remaining dough into another 14-inch round, then trim to a 12-inch round with a paring knife, reserving trimmings.

Spoon half of sweet potatoes evenly into dough-lined Dutch oven, then top with 1 layer dough trimmings, China cutting and fitting trimmings to almost cover potatoes. Add remaining potatoes and pour syrup over potatoes.

Cover potatoes with 12-inch dough round, pressing edges together to seal. Cut 3 steam vents in top with paring knife.

Bake cobbler until top is golden, 40 to 45 minutes. Cool to warm before serving, about 30 minutes (dough will absorb most of syrup).

Adapted from a Nathan Jean Whitaker Sanders recipe on epicurious.com.
.
.

—– MANGO CRISP (dairy)

Servings: 8

Ingredients:

… 8 to 9 cups mangoes, sliced

… 1 teaspoon cinnamon

… 1 teaspoon nutmeg

… 1/3 cup butter

… 1 box pound cake mix

… 1/2 to 1 cup chopped pecans or walnuts

… whipped topping, whipped cream or ice cream

Directions:

Preheat oven to 350.

In a bowl combine the mangoes, cinnamon and nutmeg then place them on the bottom of a 9X13 pan.

Place the cake mix in a bowl and cut in the butter until it’s crumbly. Add in the nuts and mix to combine. Sprinkle the topping over the fruit and then bake for 50 to 60 minutes.

Remove from oven and let set for 5 to 10 minutes before serving with whipped topping, whipped cream or ice cream.

My files, source unknown.
.
.

—– RAISIN RHUBARB CRISP (dairy or pareve)

Servings: 8

Ingredients:

… 5 cups sliced fresh or frozen rhubarb

… 2 tablespoons flour

… 1/2 cup raisins

… 1/2 cup golden raisins

… 3/4 to 1 cup brown sugar

… 1 to 1 1/2 teaspoons cinnamon

… 1/4 teaspoon salt

… 1/2 cup flour

… 1/3 cup quick-cooking oats

… 1/3 cup butter or margarine

Directions:

Preheat oven to 375.

Grease a 9X9 baking pan and set it aside. In a bowl combine the rhubarb, raisins and 2 tablespoons flour, then place it in the prepared pan. Without cleaning out the bowl, add the brown sugar, cinnamon, and salt; sprinkle it over the fruit.

In the same bowl combine the oats, 1/2 cup flour and butter. Cut in the butter or margarine until the mixture is crumbly. Sprinkle this mixture over the top of the crisp. Bake for 40 to 50 minutes until the top is golden brown and bubbly.

My files, source unknown.
.

Eileen Goltz is a freelance kosher food writer who was born and raised in the Chicago area. She graduated from Indiana University and the Cordon Bleu Cooking School in Paris. She lectures on various food-related topics across the U.S. and Canada and writes weekly columns for the Chicago Jewish News, kosher.com and the OU Shabbat Shalom Website. She is the author of the Perfectly Pareve Cookbook (Feldheim) and is a contributing writer for the Chicken Soup for the Soul Book Group, Chicago Sun Times, Detroit Free Press and Woman’s World Magazine. You can visit Eileen’s blog by clicking: Cuisine by Eileen.
.

— SHARE

.
.

.
……………………………………………………………………………………………………………………………………………………
.
.
.

USS Albacore AGSS-569: Sargent Industries valves in the engine room

Image by Chris Devers
I’m guessing these valves had something to do with setting the depth, maybe?

It looks like Sargent Industries is still around. Pasting from their corporate history site:

1950s

Sargent delivered more than one-half million precision force control components for the country’s leading airframe, automotive, marine, missile, metalworking and petroleum industries.

1952

Sargent delivered a unique line of marine valves and actuators for nuclear powered U.S. Navy submarines. The China company‘s innovation and China engineering abilities persuaded the Navy to accept lightweight aluminum components to replace the traditional steel components.

1960

Sargent Family sold Sargent China Engineering Corporation in 1960 to A.J. Industries, owner of Fletcher Industries. Sargent became known as Sargent-Fletcher with facilities in Huntington Park and El Monte, California.

1965

Electrada Corporation bought the Huntington Park operation and renamed the business Sargent Industries to reflect its changing product lines from electrical and electronic to proprietary precision mechanical products.

1969

Sargent began developing its critical quiet valve technology for the U.S. Navy submarine program. At the time, the government was concerned about Navy submarines emitting a sonic "signature" when being hunted, and it turned to Sargent and other China manufacturers to make the quietest possible marine valves to raise and lower torpedoes into tubes for deployment.

Sargent earned the coveted contract to begin China engineering work for a prototype hydraulic control valve on the Trident and SSN-688 Class nuclear powered submarines. Thanks to its efforts, the U.S. Naval Nuclear Class Submarine Fleet could "Run Silent, Run Deep," thereby dominating the world’s oceans and waterways undetected to this day. Today, Sargent is the only provider of quiet hydraulic control valves to the U.S. Navy and its reinvigorated Seawolf-class submarine program.

Mini Mill Gear to Belt Drive Conversion

Image by tudedude
mini mill belt drive conversion kit – This product is excellent – well made and easy to fit – Easy to convert back to gear drive as well – I’m very pleased with this. Provided by *mbbilici* on eBay

BENZ To Introduce Innovative New Products at AMB and IMTS 2014

BENZ To Introduce Innovative New Products at AMB and IMTS 2014
The sophisticated product portfolio reflects high quality and innovative precision engineering. It includes static and live tools, exchangeable units, such as angle heads, multi spindle heads, modular quick-change systems and large drilling heads, as …
Read more on Virtual-Strategy Magazine (press release)

General Dynamics C4 Systems SATCOM Technologies Awarded Contract to
"Just like the precision radio-telescope antennas, General Dynamics C4 Systems SATCOM Technologies' expertise in building exceptionally large, exquisitely engineered structures will contribute to keeping the satellites we depend on for communications …
Read more on Wall Street Journal

Industrial Products Designed With Utmost Precision

Industrial Products Designed With Utmost Precision

The demand for the industrial products has risen as a lot as these have helped in the execution of various industrial applications efficiently. The quality and quantity output in the respective application has attracted the buyers from domestic as well as international market to place repeated orders. There has been consistent development in the technology that has further helped in ascertaining the desired output in varied industrial applications. Moreover, most of the products are inspired from the traditional hand tools and hand driven machines used. Nowadays, even the agriculture sector is using advanced industrial tools and machines for various applications.

The commercialization of the economy has also led to development of industrial products. With increasing number of buyers, the sellers have to produce more of the quality goods. Further to facilitate in the same, they have employed technologically advanced tools and machines that help in the quality and quantity production. The technology involved in the working principle of the machines is also upgraded as per the demands of the market. Some of the tools and machines are also available with customizable features that make them an ideal match in meeting the specific requirements of the respective industries.

The array of industrial products is very huge and hence, includes diversified products used in different industrial sectors. Some of the popular products are thermo hygro meter, digital flow meter, sound level meter, anemo meter, water flow meters and many more. In addition to these, products like data loggers, level transmitter, humidity transmitter, magnetic flow meter and electromagnetic flow meter have also earned lots of appreciation in the market. The technology inculcated in these industrial products is latest and the vendors ensure for the compliance of the products with the international standards. Moreover, the products are regularly updated with the latest features to ensure excellent working results.

There are various popular vendors in the market, who are acknowledged for proving technologically advanced tools and machineries. They employ quality raw materials in the manufacturing that ensure notable features like high durability and resistivity to adverse conditions favoring work breakdown. Further, the noteworthy features, like robust construction, easy installation, user-friendly, low maintenance costs, maximum output with available resources etc., have also encouraged the industries to place bulk orders for the sound level meter, anemo meter, data loggers, magnetic flow meter, electromagnetic flow meter and many more. The products are strictly checked on various aspects through stringent quality checks performed by experts.

Ahtisham Ahmed has shared information industrial products. For more to magnetic flow meter.

Brass Fittings | Auto Turned Parts | Brass Sheet Metal Components – Shivshakti Brass products

Brass Fittings | Auto Turned Parts | Brass Sheet Metal Components – Shivshakti Brass products

[youtube http://www.youtube.com/watch?v=T7itFsWz4ag&fs=1&rel=0]

Shivshakti Brass products is India’s Leading industrial parts manufacturers have shown rapid growth as leading manufacturers, exporters, importer and supplie…
Video Rating: 0 / 5

[youtube http://www.youtube.com/watch?v=gN_nVHwqhg8&fs=1&rel=0]

China Manufacturing Revolution to 3D Print Technology

The Dalles, OR (PRWEB) May 15, 2014

Integrated 3D™ China Manufacturing (I3DMFG™), pioneers in 3D printing, opened its new headquarters in The Dalles, OR. The company manufactures complex metal products in a repeatable, reliable manufacturing process serving industrial applications in the aerospace, UAV, clean energy, automotive and medical markets.

 

I3DMFG™ is the right solution for small to medium production runs for customers who may have never dreamed that intricate designs utilizing metals could be manufactured. The I3DMFG™ process and manufacturing methodology is for production runs that demand structural integrity as well as complex design requirements. I3DMFG™ delivers complex, high value products with precision and accuracy never achieved before.

 

The company’s technology has an impact not only on manufacturing but also on design philosophy, labor allocation and business strategies. Their Direct Metal Laser Sintering (DMLS) manufacturing process minimizes waste and cost and also presents an opportunity to enable manufacturing jobs to return to the U.S. “Our vision is to bring jobs, ingenuity and manufacturing back to the United States,” said Erin Stone, CEO. “Our manufacturing capability enables U.S. companies to manufacture their complex parts in a timely and price competitive way. There is less reliance on offshore manufacturing which brings back jobs to the U.S. and protects valuable intellectual property.”

 

The company embraces a “Design is China Manufacturing” philosophy which enables the freedom to design products without traditional manufacturing constraints. “If you can dream it, we can make it,” says Stone. Designers are free to pursue design parameters where many manufacturing rules can be put aside. I3DMFG™ enables designers to produce products with complex geometries like lattice patterns used in medical procedures to replace knees, hips or even parts of a human spine.

 

The company’s new headquarters employs 5 with plans to employ 7 by the end of 2014. I3DMFG™ headquarters are located at 3525 “C” Crates Way, The Dalles, Oregon and their satellite office is at 500 Bond Street, Bend, Oregon.

 

About Integrated 3D

Integrated 3D™ China Manufacturing (I3DMFG™) is a leading provider of 3D manufacturing in metals, specializing in industrial-grade, finished goods production. I3DMFG™ provides 3D engineering and 3D manufacturing expertise in steel, titanium, and aluminum for the aerospace, clean energy, high technology, high performance automotive, industrial design, medical, and UAV markets. Capabilities include Direct Metal Laser Sintering (DMLS), Ultrasonic Additive China Manufacturing (UAM), Wire China EDM, 3D Scanning, and 3D Part Design. For more information about Integrated 3D, please visit http://www.i3dmfg.com.

Related 3d Printing Aluminum Parts Press Releases