Cool China Prototype Manufacturing photos

Check out these china prototype manufacturing pictures:

Steven F. Udvar-Hazy Center: B-29 Superfortress “Enola Gay” panorama

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Planet War II and the initial bomber to property its crew in pressurized compartments. Although designed to fight in the European theater, the B-29 discovered its niche on the other side of the globe. In the Pacific, B-29s delivered a range of aerial weapons: traditional bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the first atomic weapon utilised in combat on Hiroshima, Japan. Three days later, Bockscar (on show at the U.S. Air Force Museum close to Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Excellent Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
General: 900 x 3020cm, 32580kg, 4300cm (29ft 6 5/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Components:
Polished overall aluminum finish

Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish overall, normal late-Globe War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on reduce left nose.

My Solex from 1953

Image by Kees Wielemaker (pedaal)
Solex (bromfiets)

Solex is de naam van een Frans bedrijf dat vooral experience had in de productie van carburateurs. Het bedrijf is daarnaast ook beroemd geworden door de rijwielen met hulpmotor, die het tussen 1946 en 1988 produceerde onder de naam Vélosolex (in Nederland afgekort tot Solex).

De volledige bedrijfsnaam was Vélosolex S.I.F.A.C., Courbevoie, Seine.

Males begon in 1946 met de productie van 48 cc Clip-on motoren en bromfietsen. Het bekendst werd de kleine bromfiets met een motorblokje dat by means of een wrijvingswiel het voorwiel aandrijft.

De eerste Solex ontstond per toeval toen de Fransen Maurice Goudard en Marcel Mennesson in 1905 een fabriekje begonnen voor kleine motoronderdelen. In 1918 maakte men een fiets met een hulpmotor boven het achterwiel. Hierna werd Solex vooral bekend van de carburateurs voor automobielen. Toen Marcel Menesson begreep dat er na de Tweede Wereldoorlog weinig vraag naar auto’s zou zijn ontwikkelde hij een nieuw hulpmotortje dat boven het voorwiel werd geplaatst. In 1941 werden er al 30 prototypes op bestaande fietsen gebouwd, in 1942 gevolgd door een voorserie die al het beroemde zwanenhalsframe had. De introductie vond in 1946 plaats. Hoewel het blokje in de loop der jaren werd verbeterd bleef het toch in principe gelijk aan het eerste variety 129.

Het bedrijfje kreeg verschillende eigenaren, waaronder Renault, Motobécane en Yamaha.

In 1996 kocht een Franse importeur 60 % van de aandelen en het merk verhuisde naar Hongarije. Daar worden de kleine bromfietsjes nog steeds gebouwd. In Nederland werden Solex bromfietsen van 1948 tot 1969 in licentie gebouwd door de Productiemaatschappij Van der Heem NV die ze voor R.S. Stokvis &amp Zonen maakte, in de ENAF (Eerste Nederlandse Autorijwielen Fabriek). Het variety 3800 (uit 1966) wordt nog steeds gebouwd in Hongarije (Cyclon) en China (Dong Tian). Vooral in het commence van de jaren 60 waren solexen erg populair bij meisjes, daar waar de Puch, de Floret en andere bromfietsen bij de jongens erg in trek waren.

De Nederlandse exemplaren hebben een andere kleur dan de Franse. In 2005 werd bekend gemaakt dat het merk Solex nieuw leven werd ingeblazen door het Franse bedrijf Mopex. Daar worden gewoon de oude modellen opnieuw geproduceerd, maar om juridische redenen onder de merknaam Black ‘n Roll.

In 2005 ontstond commotie in de Nederlandse Solexwereld vanwege het verplichte bromfietskenteken. Oude Solexen waren in oorsprong bromfietsen en mochten dus niet op het fietspad rijden. Doordat gebruik van het fietspad vaak oogluikend door de politie werd toegestaan was er eigenlijk geen echt probleem. Met het bromfietskenteken zou echterdoor de kleur van de kentekenplaat precies zichtbaar worden welke Solex een bromfiets en welke een snorfiets (en dus wel op het fietspad mocht rijden) was. Half februari 2006 werd bekend dat Solexen gebouwd voor 1974 tijdelijk kosteloos en zonder keuring omgezet kunnen worden naar snorfiets. Het is de enige motoraangedreven snorfiets. Op het kenteken staat bromfiets, maar omdat daar ook op vermeld staat dat de maximale snelheid 25 km per uur is, is het dus toch een snorfiets.

SoleX

VeloSolexVéloSoleX is a moped or motorised bicycle, that was originally developed by the French manufacturer Solex, primarily based in Paris, France. Founded at the turn of the final century, the firm manufactured centrifugal radiators, carburetors, and micrometers, before branching into help motors and bicycles. Owned successively by Dassault, Renault, Motobécane/ MBK, VéloSoleX sold much more than 7 million VéloSoleX worldwide just before ceasing production in France in 1988. Production of the VéloSoleX restarted in both China and Hungary after 1988, but production ceased in Hungary in 2002. These days the Velosolex is manufactured in France. The trademark &quotVéloSoleX&quot is the home of Velosolex America, LLC. Velosolex America markets the VéloSoleX world wide.

Good Rapidly Prototyping photos

Verify out these fast prototyping images:

DEMO-Founder-School-Muir-01561

Image by The DEMO Conference
Clover Foods CEO Ayr Muir gives a keynote entitled ‘Rapid Prototyping in The Quick Meals Business’ in the course of DEMO Fall 2013 at the Santa Clara Convention Center in Santa Clara, California Wednesday October 16, 2013. Complete coverage of DEMO, the Launchpad for Emerging Technologies and Trends, can be located at bit.ly/DEMOsite.

Cool China Prototype Manufacturing photos

A few good china prototype manufacturing photos I located:

Steven F. Udvar-Hazy Center: Photomontage of SR-71 on the port side

Image by Chris Devers
Posted by means of e-mail to ☛ HoloChromaCinePhotoRamaScope‽: cdevers.posterous.com/panoramas-of-the-sr-71-blackbird-at…. See the full gallery on Posterous …

• • • • •

See far more pictures of this, and the Wikipedia report.

Specifics, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in a lot more hostile airspace or with such complete impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s efficiency and operational achievements placed it at the pinnacle of aviation technologies developments throughout the Cold War.

This Blackbird accrued about two,800 hours of flight time in the course of 24 years of active service with the U.S. Air Force. On its final flight, March six, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging three,418 kilometers (two,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane more than to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. &quotKelly&quot Johnson

Date:
1964

Nation of Origin:
United States of America

Dimensions:
Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Components:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft airframe constructed largley of titanium and its alloys vertical tail fins are constructed of a composite (laminated plastic-kind material) to minimize radar cross-section Pratt and Whitney J58 (JT11D-20B) turbojet engines feature massive inlet shock cones.

Long Description:
No reconnaissance aircraft in history has operated in a lot more hostile airspace or with such total impunity than the SR-71 Blackbird. It is the quickest aircraft propelled by air-breathing engines. The Blackbird’s overall performance and operational achievements placed it at the pinnacle of aviation technologies developments in the course of the Cold War. The airplane was conceived when tensions with communist Eastern Europe reached levels approaching a full-blown crisis in the mid-1950s. U.S. military commanders desperately needed correct assessments of Soviet worldwide military deployments, especially close to the Iron Curtain. Lockheed Aircraft Corporation’s subsonic U-two (see NASM collection) reconnaissance aircraft was an in a position platform but the U. S. Air Force recognized that this comparatively slow aircraft was currently vulnerable to Soviet interceptors. They also understood that the speedy development of surface-to-air missile systems could put U-2 pilots at grave risk. The danger proved reality when a U-2 was shot down by a surface to air missile more than the Soviet Union in 1960.

Lockheed’s 1st proposal for a new high speed, higher altitude, reconnaissance aircraft, to be capable of avoiding interceptors and missiles, centered on a design and style propelled by liquid hydrogen. This proved to be impracticable since of considerable fuel consumption. Lockheed then reconfigured the style for conventional fuels. This was feasible and the Central Intelligence Agency (CIA), already flying the Lockheed U-2, issued a production contract for an aircraft designated the A-12. Lockheed’s clandestine ‘Skunk Works’ division (headed by the gifted style engineer Clarence L. &quotKelly&quot Johnson) created the A-12 to cruise at Mach 3.2 and fly well above 18,288 m (60,000 feet). To meet these challenging requirements, Lockheed engineers overcame a lot of daunting technical challenges. Flying far more than three occasions the speed of sound generates 316° C (600° F) temperatures on external aircraft surfaces, which are sufficient to melt traditional aluminum airframes. The design group chose to make the jet’s external skin of titanium alloy to which shielded the internal aluminum airframe. Two conventional, but very effective, afterburning turbine engines propelled this remarkable aircraft. These power plants had to operate across a enormous speed envelope in flight, from a takeoff speed of 334 kph (207 mph) to far more than three,540 kph (2,200 mph). To prevent supersonic shock waves from moving inside the engine intake causing flameouts, Johnson’s group had to style a complex air intake and bypass program for the engines.

Skunk Performs engineers also optimized the A-12 cross-section style to exhibit a low radar profile. Lockheed hoped to achieve this by meticulously shaping the airframe to reflect as little transmitted radar energy (radio waves) as attainable, and by application of specific paint made to absorb, rather than reflect, those waves. This treatment became one of the very first applications of stealth technology, but it never ever completely met the design ambitions.

Test pilot Lou Schalk flew the single-seat A-12 on April 24, 1962, soon after he became airborne accidentally for the duration of higher-speed taxi trials. The airplane showed wonderful guarantee but it needed considerable technical refinement just before the CIA could fly the very first operational sortie on May 31, 1967 – a surveillance flight over North Vietnam. A-12s, flown by CIA pilots, operated as component of the Air Force’s 1129th Unique Activities Squadron beneath the &quotOxcart&quot program. While Lockheed continued to refine the A-12, the U. S. Air Force ordered an interceptor version of the aircraft designated the YF-12A. The Skunk Operates, nonetheless, proposed a &quotspecific mission&quot version configured to conduct post-nuclear strike reconnaissance. This program evolved into the USAF’s familiar SR-71.

Lockheed built fifteen A-12s, which includes a specific two-seat trainer version. Two A-12s had been modified to carry a unique reconnaissance drone, designated D-21. The modified A-12s have been redesignated M-21s. These have been developed to take off with the D-21 drone, powered by a Marquart ramjet engine mounted on a pylon amongst the rudders. The M-21 then hauled the drone aloft and launched it at speeds high adequate to ignite the drone’s ramjet motor. Lockheed also built 3 YF-12As but this type never ever went into production. Two of the YF-12As crashed for the duration of testing. Only a single survives and is on display at the USAF Museum in Dayton, Ohio. The aft section of a single of the &quotwritten off&quot YF-12As which was later utilised along with an SR-71A static test airframe to manufacture the sole SR-71C trainer. One SR-71 was lent to NASA and designated YF-12C. Including the SR-71C and two SR-71B pilot trainers, Lockheed constructed thirty-two Blackbirds. The 1st SR-71 flew on December 22, 1964. Simply because of extreme operational charges, military strategists decided that the much more capable USAF SR-71s need to replace the CIA’s A-12s. These had been retired in 1968 soon after only one year of operational missions, largely over southeast Asia. The Air Force’s 1st Strategic Reconnaissance Squadron (part of the 9th Strategic Reconnaissance Wing) took more than the missions, flying the SR-71 starting in the spring of 1968.

Following the Air Force began to operate the SR-71, it acquired the official name Blackbird– for the unique black paint that covered the airplane. This paint was formulated to absorb radar signals, to radiate some of the tremendous airframe heat generated by air friction, and to camouflage the aircraft against the dark sky at higher altitudes.

Experience gained from the A-12 program convinced the Air Force that flying the SR-71 safely required two crew members, a pilot and a Reconnaissance Systems Officer (RSO). The RSO operated with the wide array of monitoring and defensive systems installed on the airplane. This equipment incorporated a sophisticated Electronic Counter Measures (ECM) program that could jam most acquisition and targeting radar. In addition to an array of sophisticated, higher-resolution cameras, the aircraft could also carry equipment designed to record the strength, frequency, and wavelength of signals emitted by communications and sensor devices such as radar. The SR-71 was created to fly deep into hostile territory, avoiding interception with its tremendous speed and higher altitude. It could operate safely at a maximum speed of Mach three.3 at an altitude more than sixteen miles, or 25,908 m (85,000 ft), above the earth. The crew had to put on pressure suits comparable to those worn by astronauts. These suits have been needed to safeguard the crew in the event of sudden cabin stress loss even though at operating altitudes.

To climb and cruise at supersonic speeds, the Blackbird’s Pratt &amp Whitney J-58 engines have been made to operate continuously in afterburner. While this would seem to dictate higher fuel flows, the Blackbird really accomplished its greatest &quotgas mileage,&quot in terms of air nautical miles per pound of fuel burned, in the course of the Mach three+ cruise. A typical Blackbird reconnaissance flight might require a number of aerial refueling operations from an airborne tanker. Every single time the SR-71 refueled, the crew had to descend to the tanker’s altitude, typically about six,000 m to 9,000 m (20,000 to 30,000 ft), and slow the airplane to subsonic speeds. As velocity decreased, so did frictional heat. This cooling effect triggered the aircraft’s skin panels to shrink significantly, and those covering the fuel tanks contracted so a lot that fuel leaked, forming a distinctive vapor trail as the tanker topped off the Blackbird. As quickly as the tanks were filled, the jet’s crew disconnected from the tanker, relit the afterburners, and again climbed to high altitude.

Air Force pilots flew the SR-71 from Kadena AB, Japan, throughout its operational profession but other bases hosted Blackbird operations, too. The 9th SRW occasionally deployed from Beale AFB, California, to other places to carryout operational missions. Cuban missions have been flown directly from Beale. The SR-71 did not commence to operate in Europe until 1974, and then only temporarily. In 1982, when the U.S. Air Force based two aircraft at Royal Air Force Base Mildenhall to fly monitoring mission in Eastern Europe.

When the SR-71 became operational, orbiting reconnaissance satellites had already replaced manned aircraft to collect intelligence from sites deep inside Soviet territory. Satellites could not cover each and every geopolitical hotspot so the Blackbird remained a essential tool for worldwide intelligence gathering. On several occasions, pilots and RSOs flying the SR-71 offered information that proved important in formulating productive U. S. foreign policy. Blackbird crews offered critical intelligence about the 1973 Yom Kippur War, the Israeli invasion of Lebanon and its aftermath, and pre- and post-strike imagery of the 1986 raid carried out by American air forces on Libya. In 1987, Kadena-primarily based SR-71 crews flew a number of missions over the Persian Gulf, revealing Iranian Silkworm missile batteries that threatened industrial shipping and American escort vessels.

As the overall performance of space-based surveillance systems grew, along with the effectiveness of ground-primarily based air defense networks, the Air Force started to drop enthusiasm for the costly program and the 9th SRW ceased SR-71 operations in January 1990. In spite of protests by military leaders, Congress revived the plan in 1995. Continued wrangling more than operating budgets, even so, quickly led to final termination. The National Aeronautics and Space Administration retained two SR-71As and the one particular SR-71B for high-speed research projects and flew these airplanes till 1999.

On March six, 1990, the service profession of 1 Lockheed SR-71A Blackbird ended with a record-setting flight. This special airplane bore Air Force serial quantity 64-17972. Lt. Col. Ed Yeilding and his RSO, Lieutenant Colonel Joseph Vida, flew this aircraft from Los Angeles to Washington D.C. in 1 hour, 4 minutes, and 20 seconds, averaging a speed of 3,418 kph (2,124 mph). At the conclusion of the flight, ‘972 landed at Dulles International Airport and taxied into the custody of the Smithsonian’s National Air and Space Museum. At that time, Lt. Col. Vida had logged 1,392.7 hours of flight time in Blackbirds, more than that of any other crewman.

This particular SR-71 was also flown by Tom Alison, a former National Air and Space Museum’s Chief of Collections Management. Flying with Detachment 1 at Kadena Air Force Base, Okinawa, Alison logged a lot more than a dozen ‘972 operational sorties. The aircraft spent twenty-4 years in active Air Force service and accrued a total of 2,801.1 hours of flight time.

Wingspan: 55’7&quot
Length: 107’5&quot
Height: 18’6&quot
Weight: 170,000 Lbs

Reference and Further Reading:

Crickmore, Paul F. Lockheed SR-71: The Secret Missions Exposed. Oxford: Osprey Publishing, 1996.

Francillon, Rene J. Lockheed Aircraft Given that 1913. Annapolis, Md.: Naval Institute Press, 1987.

Johnson, Clarence L. Kelly: Far more Than My Share of It All. Washington D.C.: Smithsonian Institution Press, 1985.

Miller, Jay. Lockheed Martin’s Skunk Works. Leicester, U.K.: Midland Counties Publishing Ltd., 1995.

Lockheed SR-71 Blackbird curatorial file, Aeronautics Division, National Air and Space Museum.

DAD, 11-11-01

Nice Cnc Engineering photos

Nice Cnc Engineering photos

Some cool cnc engineering photos:

handrail joint

Image by Caliper Studio
Center stringer convenience stair connects two office floors in Starret Lehigh constructing. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer type a continuous ribbon. 1 1/four&quot diameter handrail posts are continuous bent &quotC&quot shapes that wrap about treds and are welded to stringer. Stair will be delivered to site in one particular piece [24′ extended 3′ wide 3′ tall @ 2000lbs].

Style by Diller Scofidio + Renfro

Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan &amp partners for engineering solutions.

Cool Precision Engineering Elements photos

Cool Precision Engineering Elements photos

A couple of nice precision engineering components images I found:

Beaulieu National Motor Museum 18-09-2012

Image by Karen Roe
1903 Cadillac
USA
This Model A was the initial Cadillac to be brought to Britain. Frederick Stanley Bennett imported it and drove it in the 1903 Thousand Miles Trial. Bennett subsequently became the official UK importer and was behind the standardisation tests of 1908 in which three identical Cadillacs were dismantled and then rebuilt from a mixed up pile of components, proving the interchangeability of the elements.
Produced in 1902 by Henry Leland, Cadillac was constructed upon the remains of the original Henry Ford Firm. From the starting Leland insisted on the highest requirements of precision engineering in order to build a quality mass produced car, demanding that ‘We need to make every piston so precise and every single cylinder so exact that every piston will fit into every cylinder’. Regardless of these higher production requirements more than 2000 Cadillacs had been developed in 1903.
Engine: 1609cc, 1 cylinder, overhead valve, six,5hp
Performance: 30mph
Cost New: £200
Manufacturer: Cadillac Automobile Business, Detroit
Owner: Mr J.F. Bennett and Mrs M Southam

Housing a collection of over 250 automobiles and motorcycles telling the story of motoring on the roads of Britain from the dawn of motoring to the present day, the award winning (Winner – The International Historic Motoring Awards of the Year 2012) National Motor Museum appeals to all age groups. From World Land Speed Record Breakers such as Campbell’s famous Bluebird to film favourites such as the magical flying car, Chitty Chitty Bang Bang and uncommon oddities like the giant orange on wheels. Don’t miss fascinating extra attributes such as the Motorsport Gallery, Wheels and Jack Tucker’s Garage – A permanent, multi award-winning 1930’s garage has been produced inside the Museum, comprehensive down to the final nut and bolt and rusty drainpipe. While the building is a comprehensive fabrication, everything in it – all the fixtures, fittings, tools and ephemera – are genuine artefacts collected over a period of 25 years.

Custom Inshore Snook Spinning Rod

Image by Cajun Custom Rods
This Cajun Custom Rods™ “Inshore Snook Spinning Rod&quot is functionality-enhanced and hand-crafted to provide you the quite greatest custom fishing rod obtainable – loaded for inshore fishing action! Precision-tuned for energy-finesse inshore spin-casting, this custom fishing rod leverages cutting-edge technologies to incorporate: a classic layout of hand-tuned Titanium REC Recoil spinning guides with &quotSpring-Back technology,&quot a CCR™ split grip manage technique utilizing Super Grade Premium Higher Density (HD) Portuguese cork, a sensitivity-tuned and ergonomic AERO spinning reel seat (silver hood / comfort finish), ProWrap &quotMetallic Green &amp Black&quot thread, and a laser-cut Snook decal. This custom fishing rod is built around a perfectly engineered 7′ Lamiglas inshore popping series rod blank … engineered, fabricated, and hand-tuned to each premium component! Custom-made, corrosion-proof, and strike-prepared … At Cajun Custom Rods™, you style the rod of your dreams and we’ll build your self-assurance!”

&quotTight Wraps, Tight Lines, and Content Fishing on the 4th of July!&quot

– Jaesen Yerger
Cajun Custom Rods™, Inc.
www.cajuncustomrods.com

Custom Inshore Snook Spinning Rod

Image by Cajun Custom Rods
This Cajun Custom Rods™ “Inshore Snook Spinning Rod&quot is efficiency-enhanced and hand-crafted to supply you the extremely greatest custom fishing rod available – loaded for inshore fishing action! Precision-tuned for power-finesse inshore spin-casting, this custom fishing rod leverages cutting-edge technologies to include: a standard layout of hand-tuned Titanium REC Recoil spinning guides with &quotSpring-Back technology,&quot a CCR™ split grip manage program utilizing Super Grade Premium High Density (HD) Portuguese cork, a sensitivity-tuned and ergonomic AERO spinning reel seat (silver hood / comfort finish), ProWrap &quotMetallic Green &amp Black&quot thread, and a laser-cut Snook decal. This custom fishing rod is constructed around a completely engineered 7′ Lamiglas inshore popping series rod blank … engineered, fabricated, and hand-tuned to every single premium element! Custom-developed, corrosion-proof, and strike-ready … At Cajun Custom Rods™, you design the rod of your dreams and we’ll create your self-assurance!”

&quotTight Wraps, Tight Lines, and Content Fishing on the 4th of July!&quot

– Jaesen Yerger
Cajun Custom Rods™, Inc.
www.cajuncustomrods.com