A couple of good milling engineering images I found:
Hagen – Freilichtmuseum Hagen – Messinghammer 01
Image by Daniel Mennerich
The Hagen Open-air Museum (LWL-Freilichtmuseum Hagen – Westfälisches Landesmuseum für Handwerk und Technik English: "LWL Open-air Museum Hagen – Westphalian State Museum for Craft and Technics") is a museum at Hagen in the southeastern Ruhr location, North Rhine-Westphalia, Germany. It was founded, collectively with the Detmold Open-air Museum, in 1960, and was first opened to the public in the early 1970s. The museum is run by the Landschaftsverband Westfalen-Lippe (LWL, regional authority for Westphalia and Lippe within North Rhine-Westphalia). It lies in the Hagen neighbourhood of Selbecke south of Eilpe in the Mäckingerbach valley.
The open-air museum brings a bit of skilled-trade history into the present, and it takes a hands-on method. On its grounds stretching for about 42 ha, not only are urban and rural trades just "displayed" along with their workshops and tools, but in a lot more than twenty of the almost sixty rebuilt workshops, they are nevertheless practised, and interested visitors can, sometimes by themselves, take element in the production.
As early as the 1920s, there have been efforts by a group of engineers and historical preservationists to preserve technological monuments for posterity. The initiator, Wilhelm Claas, even recommended the Mäckingerbach valley as a excellent location for a museum to that finish. The narrow valley was chosen, as wind, water and wood were the 3 most critical location factors for business in the 18th and 19th centuries.
In 1960, the Westphalian Open-Air Museum was founded, and thirteen years later, the gates opened to the public. In contrast to most open-air museums, which show each day life on the farm or in the country as it was in days gone by, the Hagen Open-Air Museum puts the history of these activities in Westphalia in the fore. From the late 18th century through the early years of the Industrial Revolution to the extremely industrialized society emerging in the early 20th century, the visitor can experience the development of these trades and the market in the region.
Crafts and trades demonstrated at the Westphalian Open-Air Museum incorporate ropemaking, smithing, brewing, baking, tanning, printing, milling, papermaking, and considerably far more. A favourite attraction is the triphammer workshop shown in the image above. Once the hammer is engaged, a craftsman goes to perform noisily forging a scythe, passing it among the hammer and the anvil underneath in a method referred to as peening.
The Hagen Westphalian Open-Air Museum is open from March or April until October.
Hagen – Freilichtmuseum Hagen – Wasserregale – Water Regale
Image by Daniel Mennerich
The Hagen Open-air Museum (LWL-Freilichtmuseum Hagen – Westfälisches Landesmuseum für Handwerk und Technik English: "LWL Open-air Museum Hagen – Westphalian State Museum for Craft and Technics") is a museum at Hagen in the southeastern Ruhr region, North Rhine-Westphalia, Germany. It was founded, together with the Detmold Open-air Museum, in 1960, and was first opened to the public in the early 1970s. The museum is run by the Landschaftsverband Westfalen-Lippe (LWL, regional authority for Westphalia and Lippe within North Rhine-Westphalia). It lies in the Hagen neighbourhood of Selbecke south of Eilpe in the Mäckingerbach valley.
The open-air museum brings a bit of skilled-trade history into the present, and it requires a hands-on approach. On its grounds stretching for about 42 ha, not only are urban and rural trades just "displayed" along with their workshops and tools, but in far more than twenty of the nearly sixty rebuilt workshops, they are nevertheless practised, and interested visitors can, sometimes by themselves, take component in the production.
As early as the 1920s, there have been efforts by a group of engineers and historical preservationists to preserve technological monuments for posterity. The initiator, Wilhelm Claas, even recommended the Mäckingerbach valley as a good location for a museum to that finish. The narrow valley was chosen, as wind, water and wood were the three most critical place aspects for business in the 18th and 19th centuries.
In 1960, the Westphalian Open-Air Museum was founded, and thirteen years later, the gates opened to the public. In contrast to most open-air museums, which show daily life on the farm or in the country as it was in days gone by, the Hagen Open-Air Museum puts the history of these activities in Westphalia in the fore. From the late 18th century via the early years of the Industrial Revolution to the extremely industrialized society emerging in the early 20th century, the visitor can knowledge the improvement of these trades and the sector in the area.
Crafts and trades demonstrated at the Westphalian Open-Air Museum consist of ropemaking, smithing, brewing, baking, tanning, printing, milling, papermaking, and considerably much more. A favourite attraction is the triphammer workshop shown in the image above. As soon as the hammer is engaged, a craftsman goes to operate noisily forging a scythe, passing it amongst the hammer and the anvil underneath in a procedure named peening.
The Hagen Westphalian Open-Air Museum is open from March or April till October.
Hagen – Freilichtmuseum Hagen – Oberdorf 01
Image by Daniel Mennerich
The Hagen Open-air Museum (LWL-Freilichtmuseum Hagen – Westfälisches Landesmuseum für Handwerk und Technik English: "LWL Open-air Museum Hagen – Westphalian State Museum for Craft and Technics") is a museum at Hagen in the southeastern Ruhr region, North Rhine-Westphalia, Germany. It was founded, together with the Detmold Open-air Museum, in 1960, and was initial opened to the public in the early 1970s. The museum is run by the Landschaftsverband Westfalen-Lippe (LWL, regional authority for Westphalia and Lippe within North Rhine-Westphalia). It lies in the Hagen neighbourhood of Selbecke south of Eilpe in the Mäckingerbach valley.
The open-air museum brings a bit of skilled-trade history into the present, and it takes a hands-on strategy. On its grounds stretching for about 42 ha, not only are urban and rural trades just "displayed" along with their workshops and tools, but in far more than twenty of the almost sixty rebuilt workshops, they are still practised, and interested visitors can, often by themselves, take part in the production.
As early as the 1920s, there have been efforts by a group of engineers and historical preservationists to preserve technological monuments for posterity. The initiator, Wilhelm Claas, even suggested the Mäckingerbach valley as a excellent spot for a museum to that finish. The narrow valley was selected, as wind, water and wood had been the three most crucial place variables for industry in the 18th and 19th centuries.
In 1960, the Westphalian Open-Air Museum was founded, and thirteen years later, the gates opened to the public. As opposed to most open-air museums, which show every day life on the farm or in the nation as it was in days gone by, the Hagen Open-Air Museum puts the history of these activities in Westphalia in the fore. From the late 18th century through the early years of the Industrial Revolution to the very industrialized society emerging in the early 20th century, the visitor can knowledge the improvement of these trades and the industry in the area.
Crafts and trades demonstrated at the Westphalian Open-Air Museum incorporate ropemaking, smithing, brewing, baking, tanning, printing, milling, papermaking, and significantly more. A favourite attraction is the triphammer workshop shown in the image above. As soon as the hammer is engaged, a craftsman goes to function noisily forging a scythe, passing it between the hammer and the anvil underneath in a procedure named peening.
The Hagen Westphalian Open-Air Museum is open from March or April until October.