Basic Plastics to Exhibit at the International Boatbuilders Exhibition and Conference (IBEX) September 30-October 2, 2014

Tacoma, Washington (PRWEB) September 25, 2014

Basic Plastics Manufacturing Organization is participating in the 2014 International Boatbuilders Exhibition and Conference (IBEX) taking spot September 30-October 2 at the Tampa Convention Center in Tampa, Florida. The world’s top technical boat-constructing showcase, this occasion focuses on innovative items and processes, education, and accelerating new item development. General Plastics will feature its water-resistant, simply bonded specialty marine and submersible foam goods at Booth 840.

&#13

“General Plastics has constructed longtime relationships and a record of good results delivering higher-good quality, cost-successful options to our marine-industry partners,” mentioned President Bruce Lind. “We continue to address their wants with thrilling new items, such as subsea buoyancy foams for extended depths. IBEX attendees will also see our new microcell foam series for intricate detail function in prototype and tooling applications.”

&#13

The 2014 event is anticipated to attract much more than 5,000 boat builders, yacht designers, naval architects, engineers, surveyors, boatyard/marina operators, producers, fabricators, laminators and other marine business professionals from across the United States and 50 countries.

&#13

Basic Plastics’ marine market-focused products include:

&#13

Final-A-FOAM® R-3300 Submersible Foam Series &#13

https://www.generalplastics.com/r-3300.html &#13

Now obtainable in a new 12-pcf density tested to depths of 300 ft. (uncoated) and a 25-pcf density tested to depths of 1,200 ft. (uncoated), these hydrostatic stress-resistant foams provide buoyancy for underwater flotation applications. They offer you outstanding resistance to penetration by moisture and saltwater, producing them best for permanent flotation in semi-deep submersible craft. Simply machined, these foams are also employed in resin-transfer molding as a core material, and in underwater pumps for offshore drilling rigs. The series has been utilized to assistance training operations for the International Space Station, supply flotation for assembly elements in pools that simulate weightlessness, and in robotic subsea surveillance.

&#13

Final-A-FOAM® FR-4600 Microcell Series&#13

https://www.generalplastics.com/fr-4600.html &#13

This uniform, ultra-smooth foam board cuts crisply and supports fine detail work, satisfying the demands of the most demanding boat maker. In reduced densities, it is superb for hand-carved models, prototypes and decorative boat fixtures. Higher densities are effortlessly milled by machine to generate intricate tooling that is challenging and durable. The tight microcell texture creates a superfine surface that is very easily completed and painted with no filling and sanding, decreasing production time and charges. In addition, its outstanding bonding capacity enables marine sector OEMs to create monolithic foam blocks, fundamental to designing large finished molds for yacht hulls and other restricted-run tools. FR-4600 foams are also accessible as huge blocks to minimize bond lines.

&#13

Final-A-FOAM® FR-3700 Precision-Core Series&#13

https://www.generalplastics.com/fr-3700.html &#13

A CFC-free of charge, rigid, closed-cell, flame-retardant polyurethane foam offered in densities ranging from three to 40 pounds per cubic foot. This flame-retardant, aerospace-grade (BMS eight-133-qualified) foam enables cutting of crisper edges. This good quality makes it well-suited to machining complicated shapes for composite cores.

&#13

Last-A-FOAM® FR-7100 Multi-Use Board Series &#13

https://www.generalplastics.com/fr-7100.html &#13

This uniform foam board offers low-expense FRP core material for several boat-developing applications. Effortlessly finished and painted, this economical, versatile and stable series is also excellent for hand-carved models and prototypes. These goods are formulated to meet the demands of composite boat builders at competitive rates for seat mounting pads, steering wheel mountings, decks and bulkheads.

&#13

“With our new extended-depth submersible foams, our new FR-4600 Microcell Series for high-detail applications, and our established composite core products, IBEX attendees will find a lot of marine solutions to discover at the General Plastics booth,” Lind mentioned. “We appear forward to introducing our present partners and other sector leaders to our innovative goods and capabilities.”

&#13

ABOUT General PLASTICS MANUFACTURING Business &#13

Tacoma, Washington-primarily based Common Plastics has been a top innovator in the plastics sector for a lot more than 70 years. The business develops and manufactures rigid and flexible polyurethane foam goods, including its signature Final-A-FOAM® brand series and develop-to-print composite parts. By means of its network of distributors, General Plastics exports items to 25-plus nations for the aerospace and defense, automotive, composite core, building, dimensional signage, marine, prototype and modeling, nuclear fire and crash protection, renewable energies, and tooling industries. Common Plastics is certified to ISO 9001:2008/AS9100C, ITAR-compliant, and meets such demanding high quality systems as NQA-1, Mil-I-45208A and Boeing Firm D6-82479. Pay a visit to http://www.generalplastics.com.

&#13
&#13
&#13
&#13
&#13

Reko International Group Announces Significant Precision Machining Contract

Reko International Group Announces Main Precision Machining Contract
&quotThis agreement will have a substantial effect upon our sales and operations, and shows self-confidence in our capability to machine vital components in a competitive and consistent manner,&quot stated Diane Reko, CEO. … Established in 1976, Reko …
Read more on MarketWatch

Linked Industries of Massachusetts soliciting input from businesses across
Steve Grande owner and President of MIG Meridian Industrial Group which machines quite big elements for customers with aluminum blanks ready for machine perform in the big CNC miller that is capable of working a 33,000 pound fixture. (John Suchocki …
Study a lot more on The Republican – masslive.com

Outwater Introduces Several New Woodworking Products at the 2014 International Woodworking Fair (IWF)

Outwater Introduces Several New Woodworking Products at the 2014 International Woodworking Fair (IWF)


Bogota, NJ (PRWEB) September 03, 2014

Outwater [Outwater Plastics Industries, Inc. + Architectural Merchandise by Outwater, LLC] introduced several new woodworking merchandise at the 2014 International Woodworking Fair proposed to effectively address and respond to the necessity for woodworkers to increase their productivity and increase their revenue in a progressively much more competitive marketplace.

&#13

The International Woodworking Fair, also identified as IWF, is long established as the largest woodworking trade show in North America, and is geared towards assisting woodworkers, furnishings and cabinet makers and other industry related experts in sourcing revolutionary and standard woodworking products of all genres.

&#13

Outwater has chosen to highlight those items that garnered the most considerable attention and positive feedback at the show.

&#13

1) Barn Door Hardware

&#13

Outwater’s new line of Barn Door Hardware discriminatingly fuses superior building and exceptional functionality with a refined aesthetic appeal that will elegantly blend into any classic or modern setting in which it is utilized.

&#13

Supplied as person elements in matte black, oil rubbed bronze and satin nickel powder coated finishes, Outwater’s Barn Door Hardware comprises strong, hardened aluminum rails and rail brackets along with steel roller straps, fasteners, center guides, door stops and rail splicers, which not only convey a accurate sense of substantial good quality and heft unmatched by lesser, mass produced counterparts, Outwater’s Barn Door Hardware can support big doors weighing hundreds of pounds, and is specific to further one’s appreciation of the workmanship and components utilized in its building.

&#13

two) LED Standoffs with Red, Green, Blue &amp White Illumination

&#13

In response to several customer requests for the capability to illuminate their mounted graphics, posters and promotional messages in color, Outwater now provides its really common LED Standoffs for Signage and Displays with red, green and blue lighting alternatives in conjunction with the original white lit format in which the LED Standoffs were introduced.

&#13

Easy in design and style yet ingenious in application, Outwater’s LED Standoffs use the acrylic or Plexiglas sign holders to which they have been affixed as the medium to diffuse backlit illumination, guaranteeing that promotional pieces are always uniformly lit with no any undesirable shadows or scalloping.

&#13

Wonderful for use in shops, restaurants, museums, exhibit booths as effectively as industrial and residential buildings, Outwater’s 12V LED Standoffs permit for an infinite quantity of interior display mounting choices for a assortment of diverse media such as permanent and freestanding displays, signage, directories and art.

&#13

Obtainable in polished and matte chrome, Outwater’s aluminum LED Standoffs have a diameter and height of 1-in. and can accommodate panel materials up to ½-in. thick.

&#13

Outwater’s LED Standoffs come full with all required mounting hardware to speedily bring all signage and display concepts to fruition.

&#13

three) Tri-Mod &amp Nova Sheet LED Backlighting Systems for Countertops and Backsplashes

&#13

Presented in six various panel sizes to accommodate a diversified variety of installations, Outwater’s new 1/16th in. thick, low voltage, prewired Tri-Mod LED Backlighting Panels attach to a single one more in a modular fashion with out soldering, and can be utilized in applications with a minimal can depth of only 1-1/two-in. to uniformly illuminate all sorts of translucent surfaces which includes Onyx and Corian® countertops and backsplashes.

&#13

Constructed of practically shatterproof fiberglass, each and every panel comprises energy effective, high output, dimmable LED chips that offer approximately 50,000 hours of use.

&#13

Equivalent in concept and function to the Tri-Mod LED Backlighting Panels, Outwater’s concurrently introduced 5/16th in. thick, UL Approved Nova Sheet LED Backlighting Panels fit directly beneath any substrate with no any required installation depth whatsoever, and are obtainable in custom sizes to accommodate numerous varied specialized functions.

&#13

Link: Tri-Mod LED Backlighting Panels

&#13

Hyperlink: Nova Sheet LED Backlighting Panels

&#13

four) RF Dimmers

&#13

Now you are in manage! Unlike IR Dimmers, which require that they be utilized in close proximity with a direct line-of-sight to their paired, unobstructed IR Receivers, the radio frequencies of Outwater’s new RF Dimmers are omnidirectional and can travel over an extended variety and effortlessly pass by way of walls or other barriers, permitting Outwater’s RF Receivers to be placed anyplace desired, such as in cabinets, bookcases, closets or other inconspicuous areas.

&#13

Accessible in three various formats to suit distinct applications, Outwater’s RF Dimmers and Receivers are extremely expense efficient and are manufactured making use of the highest good quality elements to guarantee years of difficulty free operation.

&#13

Afforded with a dimmer control knob (varies by model), which smoothly rotates in discreet, incremental actions, 12V and 24V lighting can be readily and precisely regulated as desired with an efficient variety from ten% to one hundred% of illumination, and can be merely turned on or off with a light tap on the RF Dimmer’s control knob.

&#13

five) 120V RGB LED Brite Lite Flex with Controller

&#13

Just introduced as the 1st and only 120V RGB LED Ribbon Flex Lighting on the market, Outwater’s new 120V RGB LED Brite Lite Flex provides a kaleidoscope of colors that can be programmed to morph at variable speeds or to remain static on any colour by means of its corresponding 9 function RGB controller.

&#13

With no fixtures to hide, the hugely versatile, diminutive physical contour of Outwater’s 120V RGB LED Brite Lite Flex can be effortlessly cut each and every 19-in.and connected finish-to-end by means of solder totally free plug in connectors, and can be mounted in all of these “hard to light” areas, or virtually anyplace that could not be previously lit.

&#13

Additionally, low heat emissions and no generated UV radiation render Outwater’s 120V RGB LED Brite Lite Flex, with its IP67 rated waterproof cover (Entirely protected against dust ingress and the effects of immersion in water among 15 cm and 1 meter) safe for indoor and outside use in a selection of industrial and residential applications in which the 120V RGB LED Brite Lite Flex might potentially be exposed to water or damp environments.

&#13

Noted for its tremendous versatility, Outwater’s 120V RGB LED Brite Lite Flex maintains constant binning codes and colour temperatures, consuming only a few watts per linear foot, and has an approximate 35,000 hour bulb life.

&#13

Offered in 16-1/2-ft., 33-ft. and 164-ft. lengths, Outwater’s 120V RGB LED Brite Lite Flex is perfect for use in tasks in which longer runs of lighting are preferred, with a continuous length up to 80-ft. that can be powered via the multifunction RGB controller.

&#13

Complementary connectors, finish caps and mounting clips along with a choice of LED Ribbon Mounting Channels facilitate a host of custom configurations and applications.

&#13

6) Plastic Channels for Economy &amp Common 120V LED Brite Lite Flex

&#13

Intended for use with Outwater’s Economy and Standard 120V LED Brite Lite Flex, Outwater’s new 383-CL (Clear), 121-CL (Clear) and 121-SIL (Silver) PVC Plastic Channels permit for cabinet and furniture manufacturers, lighting designers, contractors and electricians to inexpensively fabricate custom, aesthetically pleasing light fixtures either in the shop or correct on the jobsite.

&#13

Sold in 12-ft. simple to cut lengths, Outwater’s Plastic Channels provide protective rigidity, affording 120V LED Brite Lite Flex with the important fortification to accommodate certain functions.

&#13

Hyperlink: 383-CL (Clear) Plastic Channel for use with Outwater’s Economy 120V LED Brite Lite Flex

&#13

Link: 121-CL (Clear) Plastic Channel for use with Outwater’s Standard 120V LED Brite Lite Flex

&#13

Hyperlink: 121-SIL (Silver) Plastic Channel for use with Outwater’s Common 120V LED Brite Lite Flex

&#13

7) 120V LED Brite Lite Flex Double D-Lite

&#13

Introduced as the counterpart to the only other 120V versatile ribbon light on the market, Outwater’s new, dimmable 120V LED Brite Lite Flex Double D-Lite employs a double row of 5060 chips that provide about 40,000 hours of use with constant binning codes and colour temperatures, and generate super bright light with an extraordinarily higher output capable of 800 lumens per foot.

&#13

Simply because no transformers are required to power Outwater’s 120V LED Brite Lite Flex Double D-Lite, an unprecedented, continuous length up to 82-½ ft., which can be reduce each and every 19-in. and connected finish-to-end in the field through solder totally free plug in connectors, can be run through an offered single attached AC power cord.

&#13

Outwater’s 120V LED Brite Lite Flex Double D-Lite is IP67 rated (Totally protected against dust ingress and the effects of immersion in water amongst 15 cm and 1 meter), produces low heat emissions, no generated UV radiation, and is intended for commercial and residential use in damp environments with Outwater’s new L- Activity-8F LED Aluminum Channel.

&#13

8) L-Task-8F Profile for 120V LED Brite Lite Flex Double D-Lite

&#13

Develop with Activity-eight! Intended for use with Outwater’s lately introduced 120V LED Brite Lite Flex Double D-Lite, Outwater’s new L- Activity-8F LED Aluminum Channel comes total with every little thing necessary to very easily produce and mount a custom lighting fixture making use of Outwater’s 120V LED Brite Lite Flex Double D-Lite, and comprises precisely engineered surface angles and a snap on, influence resistant, frosted polycarbonate diffuser lens to make certain even illumination without any scalloping or hot spots.

&#13

Offered in an simple-to-cut 8-ft. length, Outwater’s L- Job-8F LED Aluminum Channel not only supplies tremendous style opportunities for a breadth of created to order applications, it is also wonderful for dissipating longevity robbing heat from LEDs by functioning as a heat sink, therefore prolonging the life and lumen output of Outwater’s 120V LED Brite Lite Flex Double D-Lite’s LEDs a lot of occasions more than.

&#13

9) Faux Wood Beams

&#13

Cast with exacting realism in polyurethane from the molds of genuine reclaimed wooden barn beams, Outwater’s Faux Wood Beams are visually and texturally indistinguishable from the originals after which they have been patterned.

&#13

Offered in four distinctive collections in fifteen distinct styles for just a mere fraction of the expense of genuine wood beams, Outwater’s Faux Wood Beams are not only suited for transforming ordinary houses into extraordinary old world style houses, they are lightweight, sturdy and straightforward to install on ceilings, walls or almost any interior or exterior surface.

&#13

Additionally, unlike their wood counterparts, which are subject to rot and insect infestation, not to mention, really heavy and hard to handle, Outwater’s hollowed Faux Wood Beams will not split, crack or splinter, and, due to the fact they are also dimensionally steady and impervious to moisture, they can be utilized with little if any necessary adhere to up upkeep in incredibly adverse environments that would not have been otherwise feasible with conventional wood beams.

&#13

Outwater’s Faux Wood Beams can be tooled and refinished as desired, and will nevertheless retain their original grain and texture employing classic strategies and tools.

&#13

To heighten the overall authenticity of an installation, Outwater provides corresponding Faux Wood Panels, corbels, beam strapping, polyurethane u-brackets and touch up stain.

&#13

Video Hyperlink: Outwater’s Faux Wood Beams

&#13

ten) Woven Wire Grille Sample Kit

&#13

Outwater’s new Woven Wire Grille Sample Kit [Model #WWG-Kit] attributes its entire collection of Woven Wire Grilles, with much more than 45 various patterns from which to decide on in numerous styles, finishes and sizes, and is an invaluable, portable resource for furnishings and cabinet producers to readily showcase Outwater’s Woven Wire Grilles to their potential buyers.

&#13

Now offered at the reduced value of only $ 55.00, Outwater’s Woven Wire Grille Sample Kit is valued at $ 250.00, and is made to advantage each furnishings and cabinet manufacturers and their consumers by supplying potential consumers with every thing necessary to facilitate purchasing decisions.        

&#13

Hand reproduced from original designs ranging from the English Nation to the French Provincial Periods, Outwater’s Woven Wire Grilles offer the ideal decorative enhancement for furniture and cabinets from any era and are also accessible in custom sizes and finishes.

&#13

11) Common 12V LED Ribbon Flex Light

&#13

Excellent for budget oriented applications, Outwater’s new 12V Standard Ribbon Flex Light may be low in expense, but delivers all of the sought after features discovered on a lot more costly flexible ribbon lighting which includes consistent binning codes and colour temperatures, in the field “cuttability,” finish-to-end solder totally free “connectability,” roughly 50,000 hours of bulb life, low heat emissions and no generated UV radiation. In addition, an IP65 rated waterproof cover (Completely protected against dust ingress with restricted permitted low pressure water jets from any direction) renders Outwater’s 12V Regular Ribbon Flex Light safe for indoor and outside commercial and residential use in damp environments.

&#13

Provided in cool white and warm white with several LED chip configurations in each 8-1/four-ft. and 16-1/2-ft. coiled lengths, Outwater’s 12V Regular Ribbon Flex Light is constructed with two DC five.five female ends, enabling it to be reduce to size every 1-in. or 1-7/8-in. (varies by model) whilst allowing for any remaining portion of unused lighting to be employed for another project.

&#13

12) SunRay T5 LED Lighting

&#13

Now, for the first time, 1 can lastly obtain a higher good quality T5 LED light fixture for much less than the expense of T5 fluorescent lighting!

&#13

Comparable in size and look to a T5 fluorescent with the functionality of a fixture, Outwater’s new, totally dimmable SunRay T5 LED Lighting is 1 of the most power efficient and expense successful LED lights offered on the market.

&#13

Quite slim and straightforward to hide, Outwater’s ultra-bright 5/eight-in. diameter SunRay T5 LED Lighting comprises a sturdy aluminum housing with a frosted lens, and can be mounted to wood, metal or glass for use in dry or damp applications, such as in showcases, cabinets, shop fixtures, freezer cases and wall units.

&#13

Offered in cool white (4,100K) and warm white (three,000K – three,500K) in five distinct sizes from 12-in. to 60-in. (in 12-in. increments), Outwater’s SunRay T5 LED Lighting provides around 50,000 hours of usage and is supplied with desirable accessories to expedite its installation and enhance its usage.

&#13

13) PDC-96 120V Power Distribution Center

&#13

Optimal operating efficiency with no any interruption to slow a single down is definitely crucial in today’s workplace. Nonetheless, overlooked peripherals are usually accountable for reduced productivity.

&#13

UL Listed for protected use in commercial or residential environments, Outwater’s new PDC-96 120V Energy Distribution Center encompasses an indispensable connection interface via an incorporated pass by way of USB port for data transmission along with two self-powered USB ports and an AC outlet, which charge and supply uninterrupted existing to computers and other standalone, power hungry electronic devices.

&#13

Manufactured with industrial grade components contained within the unit’s compact, black ABS plastic housing, Outwater’s PDC-96 120V Energy Distribution Center includes an attached heavy duty SJT four AWG 3C energy cord and simply installs by means of integrated spring clips.

&#13

14) LED Slide-N-Hide Electrical Cable and Wire Cover Extrusion

&#13

Outwater offers the excellent remedy to messy wire and cable clutter with the introduction of its LED Slide-N-Hide Extrusion, a low profile, adhesive backed electrical cable and wire cover developed to unify, defend and conceal low-voltage cables and wires up to 22-gauge, such as those utilised to power LED Ribbon Lighting.

&#13

Simple to adhere to furnishings, walls, baseboards and ceilings without drilling, nailing or stapling, Outwater’s polycarbonate LED Slide-N-Hide Extrusion is presented in white, 18-in. lengths that can be reduce as required, and measures a scant 7/8-in. wide x ¼-in. high.

&#13

15) Plastic, Aluminum and Stainless Steel Extrusions

&#13

Outwater is the biggest stocking distributor of plastic, aluminum and stainless steel extrusions in the United States, and stocks over 10,000,000 feet of ready-to-ship extrusions, offered in an extensive selection of flexible, semi-rigid and rigid material profiles in a vast array of sizes and colors.

&#13

In order to meet mounting needs for specialty application extrusions, Outwater has augmented its selection of extrusions with the introduction of new profiles, colors and supplies along with a host of obtainable cutting, packing and shipping alternatives.

&#13

About Outwater [Outwater Plastics Industries, Inc. +&#13

Architectural Goods by Outwater, LLC]:

&#13

Outwater can be contacted Toll Cost-free at 1-800-631-8375 (For sales and solution data in the USA &amp Canada) / 1-201-498-8750 (For sales and product info outdoors of the USA &amp Canada) or viewed on the internet at http://www.outwater.com.

&#13

Outwater was founded as a brick and mortar business in August 1972 on the premise to give tiny and midsized furniture and cabinet manufacturers with a reputable source from whom they could purchase plastic extrusions in the amounts that reflected their actual requirements rather than the frequently substantial minimum quantities that were dictated by quite a few manufacturers.

&#13

From the vendor of a single product line, Outwater, with sales and distribution facilities in New Jersey and Arizona, is established as an international manufacturer and distributor of far more than 65,000 conventional and innovative component products necessary by woodworkers, cabinet and furnishings makers, builders, remodelers, designers, architects, point-of-obtain and show fixturing manufacturers, OEM’s, as nicely as a diversified variety of other commercial and retail customers.

&#13

Major Item Categories include Plastic &amp Aluminum Extrusions Lighting and Lighting Accessories Furnishings, Cabinet &amp Shop Fixture Elements Knobs &amp Pulls Casters Fasteners Laminates The Foga Exhibit &amp Display Fastening Technique The Klem Connector Literature Displays Slatwall Sign Holders P.O.P Components Display Motors &amp Turntables Pedestals Injection Molded Components Brass Tubing &amp Fittings Surfacing Components Interior &amp Exterior Polymer &amp Wood Architectural Mouldings &amp Millwork Orac Decor and DEM Architectural Mouldings &amp Millwork Columns &amp Capitals Balustrading Wrought Iron Components Decorative Stamped Steel &amp Polymer Ceiling Panels Wainscoting Wall Coverings Fireplace Surrounds Plastic “Glass” Block Period &amp Contemporary Hardware Kitchen &amp Bath Accessories Kitchen &amp Bath Cabinetry and Vanities… and so considerably a lot more!

&#13

Get in touch with:&#13

Joey Shimm, Director of Advertising and marketing&#13

Outwater Plastics Industries, Inc. +&#13

Architectural Goods by Outwater, LLC&#13

joeyshimm@outwaterplastics.com&#13

(201) 498-8750

&#13

Outwater Plastics Industries, Inc. + &#13

Architectural Merchandise by Outwater, LLC

&#13

Sales &amp Solution Information (USA &amp Canada):&#13

1-800-631-8375 / 1-201-498-8750

&#13

Fax (USA &amp Canada): 1-800-888-3315 / 1-201-498-8751

&#13

Sales &amp Product Details (Outside of the USA &amp Canada): &#13

1-201-498-8750

&#13

Fax (Outside of the USA &amp Canada): 1-201-498-8751

&#13

E-mail: info@outwaterplastics.com

&#13

Net: http://www.outwater.com

&#13

New Jersey • Arizona

&#13

###

&#13
&#13
&#13
&#13
&#13

Produced In Space Announces Launch of Very first Zero-Gravity 3D Printer to International Space Station

Produced In Space Announces Launch of Very first Zero-Gravity 3D Printer to International Space Station


Mountain View, Calif. (PRWEB) September 20, 2014

On September 20 at two:14am the 1st 3D printer intended for in-space use will depart aboard a rocket from Cape Canaveral, Fla., headed for the International Space Station (ISS).

&#13

This “machine shop for space” will mark the very first time that a multi-objective manufacturing device will be utilized off-world to produce parts, tools and emergency solutions. Developed by Made In Space, Inc., beneath a contract with NASA Marshall Space Flight Center (MSFC), the 3D printer is part of a technologies demonstration intended to show that on-web site, on-demand manufacturing is a viable alternative to launching things from Earth.

&#13

“Everything that has ever been constructed for space has been built on the ground. Tremendous amounts of cash and time have been spent to spot even the simplest of items in space to help exploration and improvement,” mentioned Aaron Kemmer, Chief Executive Officer of Made In Space. “This new capability will fundamentally change how the supply and development of space missions is looked at.”

&#13

Following delivery to ISS, the 3D printer is scheduled to be installed in the Microgravity Science Glovebox (MSG) to conduct its series of prints. The printer will generate a series of test coupons, parts, tools, use case examples and even STEM project styles by students as portion of the 3D Printing in Zero-G Experiment. This experiment, intended to demonstrate additive manufacturing capabilities in space, was created by means of a partnership amongst Created In Space and NASA MSFC. Produced In Space is working with enterprise partners to formulate added use case examples to demonstrate printer capabilities.

&#13

Produced In Space’s additive manufacturing technology creates 3D objects layer by layer from filament by means of an extrusion technique specifically adapted for the challenges of the space environment. In addition to designing and building the hardware, Produced In Space will be operating the printer from a mission manage ground station.

&#13

“There were dozens of particular difficulties we had to solve in constructing a 3D printer for the Space Station. From thermal approach adjustments to rigorous security requirements, the challenges our team had to overcome were numerous, and we’re deeply proud to see the results of the work carried out by the Created In Space and NASA MSFC team now head out for a grand field test,” stated Kemmer.

&#13

This very first printer will be making use of ABS plastic whilst the second generation unit, scheduled for delivery to ISS in 2015, will provide a number of material capacity and an enhanced develop volume. The second Produced In Space printer will be accessible for use by organizations, researchers and anybody who desires to create in-space hardware rapidly, affordably, and safely.

&#13

“Placing additive manufacturing in space will lead to related capabilities on each future space station, deep space exploration vehicle, and space colony,” stated Kemmer. “Rapid construction of important materials is a crucial need if humans are going to establish a higher footprint in our universe.”

&#13

Created In Space developed the zero-gravity printer via NASA’s Tiny Business Innovation Analysis (SBIR) system. The prototype unit was tested on Zero-G Corporation’s modified Boeing 727 parabolic airplane, made achievable by NASA’s Flight Possibilities System. The flight unit passed NASA’s comprehensive security and operational standards on the way to being deemed flight ready.

&#13

Kemmer said, “This is more than a 3D printer. It is a lot more than a machine shop in space. It is a landmark for humanity. For the very first time in the history of our species, we will be manufacturing tools and hardware away from the Earth. Now that we’ve produced this breakthrough, the sky is no longer the limit for additive manufacturing – the era of off-world manufacturing has begun.”

&#13

About Made In Space&#13

Founded in 2010 with the goal of enabling humanity’s future in space, Produced In Space, Inc. has created additive manufacturing technologies for use in zero-gravity. By constructing hardware that can develop what is necessary in space, as opposed to launching it from Earth, the business plans to accelerate and broaden space development while also delivering unprecedented access for men and women on Earth to use in-space manufacturing capabilities.

&#13

Created In Space’s team consists of profitable entrepreneurs, knowledgeable space experts and essential 3D printing developers. With more than 30,000+ hours of 3D printing technology testing, and 400+ parabolas of microgravity test flights, Created In Space’s expertise and expertise has led to the very first 3D printers developed for use on the International Space Station.

&#13

For a lot more data about Produced In Space, visit: http://www.madeinspace.us&#13

Comply with on Twitter @_MadeInSpace&#13

Facebook: http://www.facebook.com/WeAreMadeInSpace

&#13

Photos and video can be discovered at madeinspace.us

&#13
&#13
&#13
&#13
&#13

Associated Machined Parts Necessary Press Releases

Created In Space Announces Launch of Very first Zero-Gravity 3D Printer to International Space Station


Mountain View, Calif. (PRWEB) September 20, 2014

On September 20 at 2:14am the 1st 3D printer intended for in-space use will depart aboard a rocket from Cape Canaveral, Fla., headed for the International Space Station (ISS).

&#13

This “machine shop for space” will mark the initial time that a multi-purpose manufacturing device will be utilized off-world to generate parts, tools and emergency solutions. Created by Made In Space, Inc., below a contract with NASA Marshall Space Flight Center (MSFC), the 3D printer is portion of a technologies demonstration intended to show that on-site, on-demand manufacturing is a viable option to launching items from Earth.

&#13

“Everything that has ever been built for space has been built on the ground. Tremendous amounts of money and time have been spent to place even the simplest of items in space to aid exploration and development,” mentioned Aaron Kemmer, Chief Executive Officer of Created In Space. “This new capability will fundamentally alter how the provide and development of space missions is looked at.”

&#13

Following delivery to ISS, the 3D printer is scheduled to be installed in the Microgravity Science Glovebox (MSG) to conduct its series of prints. The printer will create a series of test coupons, components, tools, use case examples and even STEM project styles by students as component of the 3D Printing in Zero-G Experiment. This experiment, intended to demonstrate additive manufacturing capabilities in space, was created by way of a partnership in between Made In Space and NASA MSFC. Created In Space is working with business partners to formulate added use case examples to demonstrate printer capabilities.

&#13

Produced In Space’s additive manufacturing technology creates 3D objects layer by layer from filament by way of an extrusion approach particularly adapted for the challenges of the space atmosphere. In addition to designing and creating the hardware, Produced In Space will be operating the printer from a mission manage ground station.

&#13

“There had been dozens of distinct troubles we had to resolve in constructing a 3D printer for the Space Station. From thermal method adjustments to rigorous safety requirements, the challenges our group had to overcome have been quite a few, and we’re deeply proud to see the benefits of the perform completed by the Created In Space and NASA MSFC group now head out for a grand field test,” said Kemmer.

&#13

This 1st printer will be employing ABS plastic whilst the second generation unit, scheduled for delivery to ISS in 2015, will supply numerous material capacity and an improved create volume. The second Made In Space printer will be obtainable for use by businesses, researchers and anyone who wants to develop in-space hardware quickly, affordably, and safely.

&#13

“Placing additive manufacturing in space will lead to equivalent capabilities on each and every future space station, deep space exploration automobile, and space colony,” said Kemmer. “Rapid construction of critical supplies is a essential need if humans are going to establish a greater footprint in our universe.”

&#13

Made In Space created the zero-gravity printer via NASA’s Small Company Innovation Investigation (SBIR) plan. The prototype unit was tested on Zero-G Corporation’s modified Boeing 727 parabolic airplane, produced feasible by NASA’s Flight Opportunities Plan. The flight unit passed NASA’s extensive security and operational requirements on the way to being deemed flight ready.

&#13

Kemmer mentioned, “This is far more than a 3D printer. It is much more than a machine shop in space. It’s a landmark for humanity. For the 1st time in the history of our species, we will be manufacturing tools and hardware away from the Earth. Now that we’ve made this breakthrough, the sky is no longer the limit for additive manufacturing – the era of off-globe manufacturing has begun.”

&#13

About Made In Space&#13

Founded in 2010 with the purpose of enabling humanity’s future in space, Created In Space, Inc. has created additive manufacturing technology for use in zero-gravity. By constructing hardware that can build what is needed in space, as opposed to launching it from Earth, the organization plans to accelerate and broaden space improvement whilst also offering unprecedented access for individuals on Earth to use in-space manufacturing capabilities.

&#13

Created In Space’s group consists of profitable entrepreneurs, experienced space authorities and crucial 3D printing developers. With more than 30,000+ hours of 3D printing technology testing, and 400+ parabolas of microgravity test flights, Made In Space’s expertise and knowledge has led to the initial 3D printers created for use on the International Space Station.

&#13

For a lot more info about Produced In Space, visit: http://www.madeinspace.us&#13

Follow on Twitter @_MadeInSpace&#13

Facebook: http://www.facebook.com/WeAreMadeInSpace

&#13

Images and video can be located at madeinspace.us

&#13
&#13
&#13
&#13
&#13

Find Much more Machining Parts Press Releases

Electrifying Sports Nutrition Brand, Neon Sport, Pairs with International Fitness Bag & Luggage Brand, Fitmark Bags, for an Exclusive Giveaway at Olympia Expo, This Weekend

New York, N.Y. (PRWEB) September 17, 2014

Neon Sport and Fitmark have an exclusive giveaway for fans taking portion in the fitness industry’s most anticipated event, Joe Weider’s Olympia Fitness &amp Functionality Weekend in Las Vegas, NV. Two fans will each and every take house a Neon Sport branded Fitmark Energy Duffel Bag, fully loaded with Neon Sport supplements and gear. Fitmark will hold entries for the particular prize at its booth throughout the Olympia Expo, September 19-20th.

&#13

“There’s absolutely nothing more thrilling than seeing our collective fans and consumers excited about a opportunity to win some of our exclusive items,” says Mark Samuel, CEO of Fitmark.

&#13

Neon Sport, in addition to its exclusive giveaway with Fitmark, will host an interactive game for everyone who visits its booth. Attendees will have the opportunity to win thousands of products and gear by means of a tablet primarily based ‘slot machine’ system.

&#13

“Neon Sport is a brand constructed on the delivery of fascinating, high-power fan and user experiences,” stated Neon Sport marketing head, Daniel Lourenco. “We’re celebrating the 50th Olympia with a prime nearby DJ, ‘selfie’ station, and the unveiling of the ‘Neon Sport Casino,’ which provides fans a likelihood to win totally free, exclusive Neon Sport prizes by playing our slot machine. We’ve upped the ante by partnering with Fitmark, my individual bag of choice, on some amazing prizes and giveaways for our fans,” continued Lourenco.

&#13

About Joe Weider’s Olympia Fitness &amp Efficiency Weekend:

&#13

Joe Weider’s Olympia Fitness &amp Efficiency Weekend is a time for bodybuilding and fitness enthusiasts to celebrate and reward private accomplishments by means of competitions and expos. Fitness personnel from around the globe also have the opportunity to interact with the brands that inspire them to pursue a match and wholesome lifestyle.

&#13

Olympia Expo Specifics:

&#13

When: September 19-20, 2014&#13

Exactly where: Las Vegas Convention Center, Las Vegas, NV. &#13

Neon Sport Booth: # 550&#13

Fitmark Booth: # 1611

&#13

For much more details about Olympia pay a visit to the official internet site.

&#13

About Neon Sport:

&#13

Neon Sport is an electrifying new sports nutrition brand for supplement customers searching for the hottest, latest, and loudest supplement brand on the market. Inspired by intense sports and loud music, Neon Sport is a high-powered, in your face, sensory encounter now offered at GNC and Bodybuilding.com. To find out a lot more, check out NeonSport.com or connect with the brand on their official Facebook, Twitter and Instagram pages.

&#13

About Fitmark:

&#13

Fitmark is an exclusive brand of bags for fitness enthusiasts. They have a singular goal: to fill the void that exists amongst high overall performance athletes and their bags. No matter whether at the fitness center or on the town, their exclusive global bag and luggage brand fills this void by bringing high quality and function to the fitness life-style. To learn more, visit fitmark.

&#13

###

&#13
&#13
&#13
&#13
&#13

Latest International Precision Machining News

Hardinge Inc. to Present at the 2014 Western New York Investors Conference
16, 2014 (GLOBE NEWSWIRE) — Hardinge Inc. (Nasdaq:HDNG), a leading international provider of sophisticated metal-cutting solutions and accessories, announced these days that Richard L. Simons, Chairman, President and Chief Executive Officer, and Douglas J …
Read much more on Stockhouse

Snecma (Safran) and RTI International Metals Sign Titanium Aluminide Provide
RTI delivers titanium mill goods, extruded shapes, formed and 3D-printed parts, and extremely engineered precision-machined elements by way of our downstream integrated supply chain. Headquartered in Pittsburgh, Pa., RTI has areas in the United&nbsp…
Study much more on MarketWatch

Biofuel Enzymes Marketplace: International Business Size, Industry Share, Trends, Analysis and Forecast 2012 – 2018

Biofuel Enzymes Marketplace: International Business Size, Industry Share, Trends, Analysis and Forecast 2012 – 2018


Albany, New York (PRWEB) September ten, 2014

Turning biomass into biofuel needs the breakdown of primary energy-rich element of the biomass, cellulose. Cellulose is a kind of polysaccharide, a compound formed from the bonding of several sugars into a single. For the production of biofuels, the bonds in between these many sugars need to be broken so the energy could be generated by additional processing these sugars. But breaking the bonds is not as effortless as it sounds as the bonds are extremely sturdy and need to have a proper chemical reaction to full the feat. Now the query arises, what are the candidates appropriate for this job? The answer is a variety of catalysts such as enzymes. &#13

&#13
What are Enzymes:&#13
Enzymes are a sort of biological catalysts that happen in the type of proteins and are used by cells of living organisms to catalyze a variety of chemical reactions associated with cell metabolism. With the advent of life on earth, enzymes have also evolved with the cells and are capable of undertaking metabolic reactions of a wide assortment of living cells. &#13

Browse and Get Biofuel Enzymes Marketplace Report: http://www.transparencymarketresearch.com/biofuel-enzymes-market.html&#13

&#13
Enzymes as catalysts:&#13
When acting as catalysts, enzymes increase the price of reaction in living cells. When utilised in industrial applications, they assist in speeding up the production processes of a selection of merchandise that as well at charges reduced than chemical substances. A common example of industrial use of enzymes is in speeding up the method of breaking down of starch into sugars during the production of ethanol. &#13

Enzymes are really distinct in regards to the substance it binds with as effectively as the catalyzed reaction. So, enzymes can be seen catalyzing only a certain kind of chemical reaction or a group of close-knit or closely associated chemical reactions. An wonderful property of enzymes is the reality that they only accelerate a chemical reaction but whilst undertaking so, do not undergo any permanent alter themselves. As their job gets completed in a chemical reaction, enzymes grow to be inactive.

&#13

Get report sample PDF copy from here: http://www.transparencymarketresearch.com/sample/sample.php?flag=S&amprep_id=348

&#13

Use of Enzymes in biofuel production:&#13
Several enzymes are commonly utilized for the conversion of biomass into biofuels. The nonrenewable sources of energy are speedily depleting from the face of earth and there is an inevitable demand for biofuels that can be developed from the abundant biomass at the moment accessible and that will continue to inhibit earth in abundance for the duration of any time in the future. Other than the virtually never ever ending feedstock for biomass on the face of earth and their renewable nature, there are a lot of other environment associated advantages attached with the concept of biofuels, such as less production of CO2, reduced levels of carbon oxides, sulphur oxides and particulates and other emissions. &#13

To match the production of the biofuels with their ever rising demands, scientists are developing sophisticated biochemical processes by utilizing enzymes. The study in this field is targeted at enhancing efficiency and lowering the adverse impacts of the production processes on the environment as well as enhancing the top quality of the biofuels made.

&#13

Browse the full article of this report: http://www.transparencymarketresearch.com/article/biofuel-enzymes-market place.htm

&#13

Benefits of Enzymes:&#13
Enzymes are recognized to overcome a lot of drawbacks related with the use of traditional chemical substances as catalysts for biofuel generation. For instance, the use of enzymes makes it possible for consumption of less power in the production process. Enzymes can also utilize unrefined feedstock such as waste oil, with no even needing the separation of free fatty acids that could be present in abundance in the feedstock, which is not attainable with conventional catalysts. Also, if enzymes are used in the production of bioethanol from hydrolysis of cellulose, the utility expense of the approach is greatly decreased as compared to conventional catalysts as no subsequent treatment of the byproduct is needed and the process is carried out at mild conditions.&#13

Challenges:&#13
Even so, there are also many challenges involved with the use of enzymes as catalyst in the production of biofuels, most importantly, the price. Consequently, to make their use economical for the method, enzymes are needed to be used repeatedly. For this, enzymes are largely used in their immobilized type which has a considerable impact on particular things such as operational stability, inhibition by reactants and/or products and the exhaustion of enzyme activity. So new processes that could prevent the inhibition of enzymes and that could enable a continuous separation of item is needed to be developed.&#13

Follow us on Facebook https://www.facebook.com/transparencymarketresearch

&#13
&#13
&#13
&#13
&#13

BRM Flex-Hone

BRM Flex-Hone


Los Angeles, CA (PRWEB) August 27, 2014

Brush Study Manufacturing (BRM), American-owned supplier of flexible honing tools and a complete line of industrial brushes, is announcing plans to attend the 2014 International Manufacturing Technologies Show (IMTS) from September 8 to 13 at Chicago’s McCormick Place. The brush manufacturer is also announcing the release of a new technical write-up and IMTS video about BRM Flex-Hone® tools.

&#13

IMTS 2014 is one particular of the world’s largest industrial tradeshows. With over 1 million sq. ft. of exhibit space and more than 1900 exhibitors, this year’s occasion will showcase more than 15,000 items, technologies, and processes. Held just as soon as every single two years, IMTS spans nine pavilions and includes conference sessions exactly where members of the manufacturing and machine tool industries can learn from thought leaders.

&#13

Automated Deburring and Surface Finishing

&#13

As BRM’s new technical write-up explains, the Flex-Hone® tool is the market regular for inner diameter (ID) burr removal and surface improvement. Flexible hones mount in most rotating spindles, which includes CNC equipment, drill presses, lathes, milling machines, and robotic arms. Constructed with a double-wire stem, these cylinder hones secure effortlessly in chucks, collets, and similar holding devices.

&#13

With CNC gear and machining centers, a CAT 40 collet or Jacobs-style cuck is suggested. Some companies use versatile cylinder hones with handheld power tools, but automated surface finishing and deburring supports greater component consistency. Flex-Hone® tools are available for any type or size cylinder, and assist makers make the most of production gear.    

&#13

Burr Removal, Surface Finish Improvement, and Ease-of-Use

&#13

As BRM’s new Flex-Hone® video shows, versatile honing imparts a uniform series of oil-retaining grooves for optimum lubrication. Plateau finishing leaves the base metal undisturbed, but removes raised places (burrs) that can influence dimensional tolerances and lead to portion misalignments. BRM’s flexible cylinder hones are also used for edge blending and cross-hole deburring.

&#13

Flex-Hone® tools or ball hones function abrasive globules that are permanently laminated to flexible nylon filaments. These cylinder honing tools come in 10 various abrasive sorts and 11 grits, and are accessible for bores ranging in size from 4 mm to 36”. For harder supplies such as ceramic, carbide, and aerospace alloys, use the BRM Diamond Flex-Hone®.

&#13

Visit BRM at IMTS 2014 (Booth N-7163).

&#13

From September 8 to 13, 2014 BRM’s technical specialists will be at IMTS 2014 to answer queries about Flex-Hone® tools, NamPower nylon abrasive brushes, and the California company’s full line of industrial brush tools. As BRM’s new technical report explains, visitors to Booth N-7163 and invited to bring in their most difficult component, and understand much more about surface finishing and deburring options.

&#13

About Brush Analysis Manufacturing

&#13

Brush Research Manufacturing (BRM), makers of versatile honing tools and a full line of industrial brushes, is positioned in Los Angeles, California. For over 55 years, BRM has been solving surface finishing challenges with brushing technology. BRM’s Flex-Hone® tool is the sector regular against which all other ID surface finishing options are compared.

&#13

Media Speak to:&#13

Heather Jones&#13

Director of Marketing and advertising &#13

Brush Investigation Manufacturing Co. Inc. &#13

4642 Floral Drive&#13

Los Angeles, CA 90022&#13

HJones(at)brushresearch(dot)com

&#13

For Instant Release:&#13

http://www.brushresearch.com/&#13

Ph: (323) 261-2193

&#13
&#13
&#13
&#13
&#13

BRM NamPower Brushes at IMTS 2014 (Booth N-7163): Brush Investigation Announces International Manufacturing Technologies Show (IMTS) Plans Publishes Technical Resources

BRM NamPower Brushes at IMTS 2014 (Booth N-7163): Brush Investigation Announces International Manufacturing Technologies Show (IMTS) Plans Publishes Technical Resources


Los Angeles, CA (PRWEB) September 04, 2014

Brush Analysis Manufacturing (BRM), American-owned supplier of flexible hones and nylon abrasive brushes, is announcing plans to attend the 2014 International Manufacturing Technologies Show (IMTS) from September eight to 13 at Chicago’s McCormick Place. The industrial brush manufacturer is also announcing the release of a new technical article and IMTS video about BRM NamPower brushing tools.

&#13

IMTS 2014 is America’s biggest manufacturing technology tradeshow. With more than 1 million sq. ft. of exhibit space and more than 1900 exhibitors, this year’s event will feature over 15,000 products and processes. Held biennially, IMTS fills nine pavilions and involves conference sessions where part manufacturers, machine tool specialists, and industrial distributors can understand about new technologies.

&#13

Automated Deburring, Edge Radiusing, and Surface Finishing

&#13

As a new technical write-up from BRM explains, NamPower nylon abrasive brushes are best for deburring, edge radiusing, and surface finishing the outer diameter (OD) of components. Added applications include surface preparation and cleaning. With their high-high quality elements and balanced building, NamPower brushing tools are simply integrated with automated machinery such as CNC equipment.

&#13

By automating operations, NamPower users are replacing time-consuming manual deburring while enhancing component quality. NamPower abrasive brushes conform closely to component contours and remove burrs consistently. Like BRM Flex-Hone® tools, they can be utilized with CNC machining centers, transfer lines, and robotic cells.

&#13

Burr Removal, Surface Finish Improvement, and Ease-of-Use

&#13

As BRM’s most current NamPower video shows, the household of NamPower brush tools includes abrasive nylon disc brushes, abrasive hex-drive tools, composite hub wheels, and accessories such as lightweight tool holders with flow-through cooling. BRM also supplies composite hub wheel adaptors for enhanced brush assistance, longer tool life, and lowered brush vibration.

&#13

NamPower abrasive disc brushes come in two varieties: dot for light deburring and general-objective use, and turbine for medium and heavy-duty deburing. NamPower abrasive hex-drive tools have a exclusive Hex-Drive System that enables these brushing tools to turn in each directions for complete 360° finishing. NamPower composite hub wheel brushes function indestructible cores and silicon carbide or diamond abrasive filaments.

&#13

Check out BRM at IMTS 2014 (Booth N-7163)

&#13

From September eight to 13, 2014 BRM’s technical specialists will be at IMTS 2014 to answer inquiries about NamPower nylon abrasive brushes, Flex-Hone® tools, and the California company’s complete line of industrial brush tools. As BRM’s new technical report explains, visitors to Booth N-7163 can learn much more about the surface finishing and deburring tools featured in BRM’s latest NamPower video.

&#13

About Brush Analysis Manufacturing

&#13

Brush Study Manufacturing (BRM), makers of versatile honing tools and a complete line of industrial brushes, is situated in Los Angeles, California. For more than 55 years, BRM has been solving surface finishing challenges with brushing technologies. BRM’s Flex-Hone® tool is the sector standard against which all other ID surface finishing solutions are compared.

&#13

Media Get in touch with:&#13

Heather Jones&#13

Vice President of Advertising &#13

Brush Analysis Manufacturing Co. Inc. &#13

4642 Floral Drive&#13

Los Angeles, CA 90022&#13

HJones(at)brushresearch(dot)com

&#13

For Instant Release:&#13

http://www.brushresearch.com/&#13

Ph: (323) 261-2193

&#13
&#13
&#13
&#13
&#13