Cool Precision Engineering Services images

Cool Precision Engineering Services images

A couple of good precision engineering solutions images I identified:

Steven F. Udvar-Hazy Center: North American P-51C, “Excalibur III”

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | North American P-51C, &quotExcalibur III&quot:

On May possibly 29, 1951, Capt. Charles F. Blair flew Excalibur III from Norway across the North Pole to Alaska in a record-setting 10½ hours. Utilizing a technique of cautiously plotted &quotsun lines&quot he developed, Blair was capable to navigate with precision where conventional magnetic compasses usually failed. Four months earlier, he had flown Excalibur III from New York to London in much less than eight hours, breaking the current mark by over an hour.

Excalibur III first belonged to famed aviator A. Paul Mantz, who added further fuel tanks for lengthy-distance racing to this regular P-51C fighter. With it Mantz won the 1946 and 1947 Bendix air race and set a transcontinental speed record in 1947 when the airplane was named Blaze of Noon. Blair purchased it from Mantz in 1949 and renamed it Excalibur III, following the Sikorsky VS-44 flying boat he flew for American Export Airlines.

Present of Pan American Globe Airways

Manufacturer:
North American Aircraft Organization

Date:
1944

Nation of Origin:
United States of America

Dimensions:
Wingspan: 11.three m (37 ft)
Length: 9.eight m (32 ft three in)
Height: 3.9 m (12 ft 10 in)
Weight, empty: four,445 kg (9,800 lb)
Weight, gross: five,052 kg (11,800 lb)
Leading speed: 700 km/h (435 mph)

Components:
All round: Aluminum

Physical Description:
Single seat, single engine, low wing monoplane, World War II fighter modified for racing.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing 367-80 Jet Transport:

On July 15, 1954, a graceful, swept-winged aircraft, bedecked in brown and yellow paint and powered by 4 revolutionary new engines very first took to the sky above Seattle. Constructed by the Boeing Aircraft Company, the 367-80, better recognized as the Dash 80, would come to revolutionize commercial air transportation when its developed version entered service as the renowned Boeing 707, America’s 1st jet airliner.

In the early 1950s, Boeing had begun to study the possibility of making a jet-powered military transport and tanker to complement the new generation of Boeing jet bombers entering service with the U.S. Air Force. When the Air Force showed no interest, Boeing invested million of its own capital to build a prototype jet transport in a daring gamble that the airlines and the Air Force would purchase it when the aircraft had flown and proven itself. As Boeing had accomplished with the B-17, it risked the business on one particular roll of the dice and won.

Boeing engineers had initially based the jet transport on studies of improved styles of the Model 367, greater recognized to the public as the C-97 piston-engined transport and aerial tanker. By the time Boeing progressed to the 80th iteration, the style bore no resemblance to the C-97 but, for security causes, Boeing decided to let the jet project be identified as the 367-80.

Function proceeded rapidly after the formal commence of the project on Might 20, 1952. The 367-80 mated a big cabin based on the dimensions of the C-97 with the 35-degree swept-wing design and style based on the wings of the B-47 and B-52 but considerably stiffer and incorporating a pronounced dihedral. The wings were mounted low on the fuselage and incorporated high-speed and low-speed ailerons as properly as a sophisticated flap and spoiler method. Four Pratt &amp Whitney JT3 turbojet engines, every producing ten,000 pounds of thrust, had been mounted on struts beneath the wings.

Upon the Dash 80’s very first flight on July 15, 1954, (the 34th anniversary of the founding of the Boeing Firm) Boeing clearly had a winner. Flying 100 miles per hour more rapidly than the de Havilland Comet and drastically larger, the new Boeing had a maximum variety of a lot more than 3,500 miles. As hoped, the Air Force bought 29 examples of the style as a tanker/transport after they convinced Boeing to widen the design and style by 12 inches. Happy, the Air Force designated it the KC-135A. A total of 732 KC-135s have been built.

Speedily Boeing turned its consideration to selling the airline sector on this new jet transport. Clearly the business was impressed with the capabilities of the prototype 707 but never a lot more so than at the Gold Cup hydroplane races held on Lake Washington in Seattle, in August 1955. For the duration of the festivities surrounding this occasion, Boeing had gathered many airline representatives to appreciate the competitors and witness a fly previous of the new Dash 80. To the audience’s intense delight and Boeing’s profound shock, test pilot Alvin &quotTex&quot Johnston barrel-rolled the Dash 80 more than the lake in complete view of thousands of astonished spectators. Johnston vividly displayed the superior strength and overall performance of this new jet, readily convincing the airline market to acquire this new airliner.

In browsing for a marketplace, Boeing discovered a ready client in Pan American Airway’s president Juan Trippe. Trippe had been spending considerably of his time searching for a appropriate jet airliner to enable his pioneering business to sustain its leadership in international air travel. Operating with Boeing, Trippe overcame Boeing’s resistance to widening the Dash-80 design, now known as the 707, to seat six passengers in each and every seat row rather than 5. Trippe did so by putting an order with Boeing for 20 707s but also ordering 25 of Douglas’s competing DC-eight, which had but to fly but could accommodate six-abreast seating. At Pan Am’s insistence, the 707 was made 4 inches wider than the Dash 80 so that it could carry 160 passengers six-abreast. The wider fuselage created for the 707 became the common design for all of Boeing’s subsequent narrow-body airliners.

Despite the fact that the British de Havilland D.H. 106 Comet and the Soviet Tupolev Tu-104 entered service earlier, the Boeing 707 and Douglas DC-eight were larger, quicker, had higher variety, and have been much more profitable to fly. In October 1958 Pan American ushered the jet age into the United States when it opened international service with the Boeing 707 in October 1958. National Airlines inaugurated domestic jet service two months later utilizing a 707-120 borrowed from Pan Am. American Airlines flew the 1st domestic 707 jet service with its personal aircraft in January 1959. American set a new speed mark when it opened the initial regularly-scheduled transcontinental jet service in 1959. Subsequent nonstop flights in between New York and San Francisco took only 5 hours – three hours less than by the piston-engine DC-7. The one-way fare, like a surcharge for jet service, was five.50, or 1 round trip. The flight was almost 40 % more rapidly and almost 25 percent less expensive than flying by piston-engine airliners. The consequent surge of traffic demand was substantial.

The 707 was originally designed for transcontinental or one particular-stop transatlantic range. But modified with added fuel tanks and a lot more effective turbofan engines, the 707-300 Intercontinental series aircraft could fly nonstop across the Atlantic with complete payload beneath any conditions. Boeing constructed 855 707s, of which 725 had been bought by airlines worldwide.

Possessing launched the Boeing Company into the industrial jet age, the Dash 80 soldiered on as a hugely successful experimental aircraft. Until its retirement in 1972, the Dash 80 tested quite a few sophisticated systems, a lot of of which were incorporated into later generations of jet transports. At one particular point, the Dash 80 carried 3 distinct engine kinds in its four nacelles. Serving as a test bed for the new 727, the Dash 80 was briefly equipped with a fifth engine mounted on the rear fuselage. Engineers also modified the wing in planform and contour to study the effects of various airfoil shapes. Quite a few flap configurations have been also fitted like a hugely sophisticated technique of &quotblown&quot flaps which redirected engine exhaust more than the flaps to enhance lift at low speeds. Fin height and horizontal stabilizer width was later improved and at 1 point, a specific multiple wheel low pressure landing gear was fitted to test the feasibility of operating future heavy military transports from unprepared landing fields.

After a lengthy and distinguished profession, the Boeing 367-80 was finally retired and donated to the Smithsonian in 1972. At present, the aircraft is installated at the National Air and Space Museum’s new facility at Washington Dulles International Airport.

Gift of the Boeing Organization

Manufacturer:
Boeing Aircraft Co.

Date:
1954

Nation of Origin:
United States of America

Dimensions:
Height 19′ two&quot: Length 73′ 10&quot: Wing Span 129′ eight&quot: Weight 33,279 lbs.

Physical Description:
Prototype Boeing 707 yellow and brown.

Good Sheet Metal Elements images

Good Sheet Metal Elements images

Some cool sheet metal elements images:

Tupolev Tu-four

Image by Peer.Gynt
Monino Central Air Force Museum (Moscow) July 2010

The Tupolev Tu-4 (NATO reporting name: Bull) was a piston-engined Soviet strategic bomber that served the Soviet Air Force from the late 1940s to mid-1960s. It was a reverse-engineered copy of the U.S.-produced Boeing B-29 Superfortress.
Towards the finish of Planet War II, the Soviet Union saw the need for a strategic bombing capability equivalent to that of the United States Army Air Forces. The Soviet VVS air arm did have their own-design and style Petlyakov Pe-8 4-engined &quotheavy&quot in service at the start of the war, but only 93 have been built by the end of the war as the sort had been equipped with unreliable turbocharged V12 diesel engines at the commence of its service to give it extended variety. The U.S. often carried out bombing raids on Japan, really close to the Soviet Union’s borders, from distant Pacific forward bases using B-29 Superfortresses. Joseph Stalin ordered the improvement of a comparable bomber.

The U.S. twice refused to supply the Soviet Union with B-29s under Lend Lease. Nevertheless, on 4 occasions during 1944, person B-29s produced emergency landings in Soviet territory and one crashed soon after the crew bailed out. In accordance with the Soviet–Japanese Neutrality Pact, the Soviets had been neutral in the Pacific War and the bombers have been therefore interned and kept by the Soviets. Regardless of Soviet neutrality, America demanded the return of the bombers, but the Soviets refused. 3 repairable B-29s had been flown to Moscow and delivered into Tupolev OKB. One particular B-29 was dismantled, the second was utilized for flight tests and training, and the third one particular was left as a standard for cross-reference. With the Soviet declaration of war against Japan in accordance with the Yalta agreement to enter the war within 90 days of VE day (to let it time to move its forces from Europe to Asia) at about 11pm on August eight, 1945 — two days right after the U.S. bombing of Hiroshima and the subsequent entente with Japan ending, the fourth B-29 was returned to the US along with its crew.

Stalin tasked Tupolev with cloning the Superfortress in as brief a time as feasible as an alternative of continuing with his personal comparable ANT-64 or samolet (aircraft) 64, and Soviet sector was to generate 20 copies of the aircraft ready for State acceptance trials in just two years.

The Soviet Union used the metric technique, hence sheet aluminum in thicknesses matching the B-29’s imperial measurements have been unavailable. The corresponding metric-gauge metal was of various thicknesses. Alloys and other supplies new to the Soviet Union had to be brought into production. In depth re-engineering had to take place to compensate for the variations, and Soviet official strength margins had to be decreased to avoid further redesign,[9] yet despite these challenges the prototype Tu-four only weighed about 750 lb (340 kg) much more than the B-29, a distinction of much less than 1%.

The engineers and suppliers of elements were under stress from Tupolev, Stalin, and the government to generate an exact clone of the original B-29 to facilitate production and Tupolev had to overcome substantial resistance in favor of using equipment that was not only already in production but in some situations much better than the American version. Each and every component produced and each and every alteration was scrutinized and was subject to a lengthy bureaucratic method. Differences have been restricted to the engines, the defensive weapons, the radio (a later model used in lend-lease B-25s was employed in spot of the radio in the interned B-29s) and the identification buddy or foe (IFF) program – the American IFF getting unsuitable. The Soviet engine, the Shvetsov ASh-73 was a development of the Wright R-1820 but was not otherwise associated to the B-29s Wright R-3350. and the remote-controlled gun turrets were redesigned to accommodate the harder hitting and longer ranged Soviet Nudelman NS-23 23mm cannon. Kerber, Tupolev’s deputy at the time, recalled in his memoirs that engineers necessary authorization from a higher-ranking common to use Soviet-made parachutes. Extra changes had been created as a result of difficulties encountered during testing, associated to engine and propeller failures and equipment modifications had been produced throughout the aircraft’s service life. Despite the fact that it has been extensively quoted, the Tu-4 did not have a random hole drilled in the wing either to emulate a bullet hole or due to the fact a Boeing engineer made a mistake – the Russians had three total aircraft and the wreckage of a fourth and the likelihood of all four getting a hole in the same spot is as well small to be credible. The aircraft included 1 Boeing-Witchita −5-BW, 2 Boeing-Witchita −15-BWs and the wreckage of 1 Boeing-Renton −1-BN – 3 diverse models from two diverse production lines. Only 1 of the 4 had de-icing boots as utilised on the Tu-four.

The Tu-four 1st flew on 19 May 1947, piloted by test pilot Nikolai Rybko. Serial production started immediately, and the sort entered big-scale service in 1949. Entry into service of the Tu-four threw the USAF into a panic, because the Tu-4 possessed enough range to attack Chicago or Los Angeles on a 1-way mission, and this may have informed the maneuvers and air combat practice performed by US and British air forces in 1948 involving fleets of B-29s. Some attempts to develop midair refueling systems have been made to extend the bomber’s variety, but these have been fitted to only a few aircraft.
The aircraft was initial displayed during a flyover at the Aviation Day parade on three August 1947 at the Tushino Airport in Moscow. 3 aircraft flew overhead. It was assumed that these were merely the three B-29 bombers that were recognized to have been diverted to the USSR throughout Planet War II. Minutes later a fourth aircraft appeared. Western analysts realized that the Soviets must have reverse-engineered the B-29. The appearance of an clearly Superfortress-derived Tu-70 transport more than the crowd removed any doubt about the accomplishment of the reverse-engineering.
Eight hundred and forty-seven Tu-4s had been built when production ended in the Soviet Union in 1952, some going to China during the later 1950s. Many experimental variants were built and the beneficial experience launched the Soviet strategic bomber plan. Tu-4s were withdrawn in the 1960s, getting replaced by far more advanced aircraft: the Tupolev Tu-16 (beginning in 1954) and the Tupolev Tu-95 (beginning in 1956). By the beginning of the 1960s, the only Tu-4s nevertheless operated by the Soviets were utilized for transport or airborne laboratory purposes. A Tu-4A was the very first Soviet aircraft to drop a nuclear weapon, the RDS-1.

Santa’s Electric

Image by jurvetson
What a superb present from Tesla – the opportunity to drive the identical vehicle that I have had since August, but now with an completely new motor, inverter and gear box. They just upgraded me to Powertrain 1.5 and firmware 3.1.12

It’s much smoother and has the rail gun torque that I had read so a lot about. Also, the battery coolant pump now shuts down when parked (an irksome precaution in early models that is no longer required).

The fascinating back story is that a key redesign of the whole drivetrain was enabled by a breakthrough in the semiconductor market – a new IGBT (power transistor) that just began shipping. Advances in the smallest of components unlocked a design and style cascade to remove the need for shifting altogether (no transmission) while also improving efficiency (longer range, higher efficiency, 30% more torque, 14,000 RPM redline).

The Tesla weblog has the full story and gearbox photos from the CTO, J.B. Straubel.

Nice Aluminium Machining China images

Nice Aluminium Machining China images

Verify out these aluminium machining china images:

Steven F. Udvar-Hazy Center: Profile view of the SR-71 Blackbird, F-four Corsair, Peashooter, among other folks

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in a lot more hostile airspace or with such total impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s performance and operational achievements placed it at the pinnacle of aviation technology developments for the duration of the Cold War.

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging three,418 kilometers (two,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane more than to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. &quotKelly&quot Johnson

Date:
1964

Nation of Origin:
United States of America

Dimensions:
General: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (five.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft five 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Materials:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft airframe constructed largley of titanium and its alloys vertical tail fins are constructed of a composite (laminated plastic-sort material) to decrease radar cross-section Pratt and Whitney J58 (JT11D-20B) turbojet engines feature huge inlet shock cones.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing P-26A Peashooter :

The Boeing P-26A of the mid-to-late 1930s introduced the concept of the high-performance, all-metal monoplane fighter design, which would turn out to be normal in the course of Planet War II. A radical departure from wood-and-fabric biplanes, the Peashooter nonetheless retained an open cockpit, fixed landing gear, and external wing bracing.

Most P-26As stationed overseas had been ultimately sold to the Philippines or assigned to the Panama Canal Division Air Force, a branch of the U.S. Army Air Corps. A number of went to China and one to Spain. This one particular was based at Selfridge Field in Michigan and Fairfield Air Depot in Ohio in between its acceptance by the U.S. Army Air Corps in 1934 and its transfer to the Canal Zone in 1938. It was offered to Guatemala in 1942 and flew in the Guatemalan air force till 1954. Guatemala donated it to the Smithsonian in 1957.

Present of the Guatemalan Air Force, Republic of Guatemala

Manufacturer:
Boeing Aircraft Co.

Date:
1934

Nation of Origin:
United States of America

Dimensions:
Wingspan: 8.five m (27 ft 11 in)
Length:7.three m (23 ft 11 in)
Height:three.1 m (ten ft 2 in)
Weight, empty:996 kg (2,196 lb)
Weight, gross:1,334 kg (two,935 lb)
Best speed:377 km/h (234 mph)
Engine:Pratt &amp Whitney R-1340-27, 600 hp
Armament:two .30 cal. M2 Browning aircraft machine guns

• • • • •

Quoting Smithsonian National Air and Space Museum | Vought F4U-1D Corsair :

By V-J Day, September 2, 1945, Corsair pilots had amassed an 11:1 kill ratio against enemy aircraft. The aircraft’s distinctive inverted gull-wing design permitted ground clearance for the massive, three-bladed Hamilton Normal Hydromatic propeller, which spanned far more than 4 meters (13 feet). The Pratt and Whitney R-2800 radial engine and Hydromatic propeller was the biggest and a single of the most effective engine-propeller combinations ever flown on a fighter aircraft.

Charles Lindbergh flew bombing missions in a Corsair with Marine Air Group 31 against Japanese strongholds in the Pacific in 1944. This airplane is painted in the colors and markings of the Corsair Sun Setter, a Marine close-support fighter assigned to the USS Essex in July 1944.

Transferred from the United States Navy.

Manufacturer:
Vought Aircraft Company

Date:
1940

Country of Origin:
United States of America

Dimensions:
General: 460 x 1020cm, 4037kg, 1250cm (15ft 1 1/8in. x 33ft five 9/16in., 8900lb., 41ft 1/8in.)

Components:
All metal with fabric-covered wings behind the major spar.

Physical Description:
R-2800 radial air-cooled engine with 1,850 horsepower, turned a 3-blade Hamilton Regular Hydromatic propeller with solid aluminum blades spanning 13 feet 1 inch wing bent gull-shaped on both sides of the fuselage.

Good Precision Machining images

Good Precision Machining images

A few good precision machining photos I discovered:

Okanagan’s Highland Trail gets renewed life

Image by BC Gov Photos
Thanks to a multi-level partnership between Recreation Sites and Trails BC, BC Parks and the Vernon Fire Zone to improve to Okanagan’s recreation opportunities, the Highland Trail is getting upgrades to make it safer and far more accessible for residents and visitors.

The first phase of the multi-phase improvement project is now comprehensive. The trailhead, in the northeast corner of Kalamalka Lake Provincial Park at Cosens Bay Gate, has been cleared of debris and widened and a new sign has been installed.

Note the section of the Highland Trail inside the provincial park is known locally as Higher Rim Trail.

For much more information: www.newsroom.gov.bc.ca/2013/ten/partnership-provides-local…

Okanagan’s Highland Trail gets renewed life

Image by BC Gov Images
Thanks to a multi-level partnership amongst Recreation Internet sites and Trails BC, BC Parks and the Vernon Fire Zone to improve to Okanagan’s recreation possibilities, the Highland Trail is getting upgrades to make it safer and far more accessible for residents and guests.

The very first phase of the multi-phase improvement project is now total. The trailhead, in the northeast corner of Kalamalka Lake Provincial Park at Cosens Bay Gate, has been cleared of debris and widened and a new sign has been installed.

Note the section of the Highland Trail inside the provincial park is known locally as Higher Rim Trail.

For much more information: www.newsroom.gov.bc.ca/2013/10/partnership-provides-nearby…

Miniature Machine

Image by jessamyn

Cool Precision Cnc Milling images

Cool Precision Cnc Milling images

Verify out these precision cnc milling pictures:

Julien Maire “Relief” Residency

Image by iMAL.org
For much more than ten years, Julien Maire has mastered and used in unexpected techniques sophisticated technologies such as CNC mills, laser cutters, precision optics, and so on. Right now, 3D printers are naturally also component of his toolbox.
For these two new pieces, Julien created and constructed all original components, mechanisms and elements employing the complete variety of machines obtainable at Fablab.iMAL, from Ultimaker and Mendel DIY printers to the laser-based Form1 3D printer.

Julien Maire “Relief” Residency

Image by iMAL.org
For much more than 10 years, Julien Maire has mastered and employed in unexpected methods sophisticated technologies such as CNC mills, laser cutters, precision optics, etc. Nowadays, 3D printers are naturally also element of his toolbox.
For these two new pieces, Julien created and built all original parts, mechanisms and elements utilizing the entire variety of machines obtainable at Fablab.iMAL, from Ultimaker and Mendel DIY printers to the laser-primarily based Form1 3D printer.

Cool Prototype Machined Components images

Cool Prototype Machined Components images

Some cool prototype machined components pictures:

Colonel Danko with RPD-SD Machine Gun

Image by enigmabadger
A important NKGB operative, Col. Danko has sworn he will eliminate the enemy agent Viper soon after their conflict in Leningrad which price Viper an eye and Danko numerous of his colleagues.

Just primarily based on the Escape from New York-vibe this BrickArms part mixture seemed to have to me! It contains:

– RPD prototype
– U-Scope attached by means of U-Clip
– Variety-one hundred magazine