A handful of good cnc engineering solutions images I discovered:
Edge Slab Box with Glass
Image by Caliper Studio
Center stringer convenience stair connects two workplace floors in Starret Lehigh building. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer kind a continuous ribbon. 1 1/four" diameter handrail posts are continuous bent "C" shapes that wrap around treds and are welded to stringer. Stair was delivered to web site in 1 piece [24′ lengthy 3′ wide 3′ tall @ 2000lbs. Glass is two 1/two" layers of low iron tempered glass with PVB interlayer. Each panel is a 148.375"x41.25" rectangle that weighs 522lbs. Reduce out in concrete floor is trimmed with a box of 1/two" thick blackened steel that was completely prewelded in the shop. The box picks up the load at leading of stair and serves as a custom base shoe for the glass.
Design by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering solutions.
Edge Slab Box with Glass
Image by Caliper Studio
Center stringer comfort stair connects two workplace floors in Starret Lehigh creating. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer type a continuous ribbon. 1 1/4" diameter handrail posts are continuous bent "C" shapes that wrap about treds and are welded to stringer. Stair was delivered to website in one particular piece [24′ lengthy 3′ wide 3′ tall @ 2000lbs. Glass is two 1/2" layers of low iron tempered glass with PVB interlayer. Every panel is a 148.375"x41.25" rectangle that weighs 522lbs. Cut out in concrete floor is trimmed with a box of 1/2" thick blackened steel that was completely prewelded in the shop. The box picks up the load at best of stair and serves as a custom base shoe for the glass.
Design by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering solutions.
Blackened steel stair with stainless treads
Image by Caliper Studio
Center stringer convenience stair connects two workplace floors in Starret Lehigh developing. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer form a continuous ribbon. 1 1/four" diameter handrail posts are continuous bent "C" shapes that wrap around treds and are welded to stringer. Stair will be delivered to web site in a single piece [24′ extended 3′ wide 3′ tall @ 2000lbs].
Design by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering services.