Functioning on a propeller at Readhead’s shipyard

Check out these precision components engineering images:

Working on a propeller at Readhead’s shipyard
precision parts engineering
Image by Tyne & Put on Archives & Museums
Workers fitting a propeller to its shaft at the shipyard of John Readhead &amp Sons Ltd, South Shields, May possibly 1963 (TWAM ref. 1061/1197).

This set celebrates the achievements of the shipyard of John Readhead &amp Sons. The firm has played a considerable function in the North East’s illustrious shipbuilding history and the improvement of South Shields.

The company started in 1865 when John Readhead, a shipyard manager, entered into organization with J Softley at a small yard on the Lawe at South Shields. Following the dissolution of the partnership in 1872, it continued as John Readhead &amp Co on the same web site till 1880 when the High West Yard was bought. Soon after Readhead’s four sons had been taken into the business in 1888 the organization traded as John Readhead &amp Sons becoming a limited company in 1908. In 1968 the business was absorbed by the Swan Hunter Group and in 1977 became element of the nationalised British Shipbuilders. In the exact same year the last vessel was launched and the internet site was sold off in 1984.

Readheads was prolific and built more than 600 ships from 1865 to 1968, including 87 vessels for the Hain Steamship Company Ltd and more than forty for the Strick Line Ltd. The shipyard also constructed four ships for the Prince Line, founded by Sir James Knott. The firm built vessels, which were involved in the key conflicts of the Twentieth Century. In the course of the Initial Planet War they built patrol vessels and ‘x’ lighters (motor landing craft utilised in the Gallipoli campaign) for the Admiralty. During the Second Globe War the firm constructed tankers for the Normandy Landings.

(Copyright) We’re happy for you to share this digital image within the spirit of The Commons. Please cite ‘Tyne &amp Put on Archives &amp Museums’ when reusing. Specific restrictions on high quality reproductions and commercial use of the original physical version apply even though if you’re unsure please e-mail archives@twmuseums.org.uk.

Twins are engineering a bright future by functioning closely with their bank

Twins are engineering a vibrant future by working closely with their bank
Supplying buyers in high value industrial markets such as aerospace, health-related, automotive and defence would have been just a dream a few years ago for the brothers&#39 company Staffordshire Precision Engineering (SPE), but not anymore. The move&nbsp…
Study far more on Express.co.uk

F4E awards AMEC Foster Wheeler one of the biggest robotics contracts ever in
The machine will consist of an unprecedented quantity of high-technologies components that will call for a vast variety of bespoke devices for operation and upkeep. … Below the leadership of AMEC Foster Wheeler, a group of laboratories and companies …
Study far more on Phys.Org

Subaru WRX Tuning Company is Functioning with P&A International on Turbocharger Upgrade Kit

Subaru WRX Tuning Company is Functioning with P&A International on Turbocharger Upgrade Kit


Shanghai, China (PRWEB) August 29, 2014

P&ampA International, a die casting China primarily based company, has just announced that is has joined forces with a leading aftermarket and race car components designer and manufacturer to create higher end tuning solutions for Subaru racing teams. As element of this collaboration, a leading Subaru WRX tuning organization is operating with P&ampA International in order to finalize the development and production of the extensive turbocharger upgrade kit for the 2016 Subaru STI and later WRX models.

&#13

As a firm spokesperson for P&ampA International explained, the business has been contracted to manufacture the cast aluminum intake manifold for the new boxer 4 cylinder two.0L and two.5L engines.

&#13

“The two. liter FA series flat four is derived from the Subaru Forester 2.0XT and is an superb candidate for energy upgrades,” the spokesperson explained, adding that the new intake manifold consists of intricate custom die casting and precision CNC machined parts that are place collectively to form variable intake manifold that will enhance engine volumetric efficiency to peak at two points: 2500 RPM and 6500 RPM.

&#13

“This is done via changing geometry of the intake tract identified as pulse tuning.”

&#13

The style that P&ampA International is operating on is focused on mild and large turbocharger upgrades where the 2500 RPM point is employed to assist with the turbocharger spool, bringing down the turbo spool threshold some 500 RPM, which also allows the engine to operate effectively in complete energy output close to redline in high demand scenarios.

&#13

“The assembly will consist of aviation grade aluminum intake with custom electronic handle module and an enlarged throttle valve,” the spokesperson stated, adding that there will be provisions at every single port for water-methanol injectors supplied by UK-based company Aquamist, as nicely as provisions for NOS.

&#13

“The very same intake manifold will be obtainable in carbon fibre for race applications but tuned for max VE at 4500 RPM and 8500 RPM.”

&#13

About P&ampA International:

&#13

P&ampA is a China based company formed in 2008 by partners with engineering backgrounds. The company’s primary focus is the manufacturing of talent and technologies intense parts and elements in China. Getting a tiny player in the market, the organization operates really hard to establish themselves by providing their clientele customized service, often going outdoors of their scope to assistance them. For much more info, please visit http://www.pa-international.com.au/index.php?option=com_content&ampview=article&ampid=128&ampItemid=173

&#13
&#13
&#13
&#13
&#13