Cool Custom Machined Elements photos

Cool Custom Machined Elements photos

Some cool custom machined components photos:

Arlen Ness’ Untitled

Image by cliff1066™
Individuals in the know contact Arlen Ness “Godfather,” not because he makes gives you cannot refuse, but as a sign of respect for his accomplishments all through a extended and storied career. He is the patriarch of the custom motorcycle sector.

Back in “the day,” circa 1970 BC (Just before Catalogs), when choppers were nonetheless the homespun products of some regional dude with a torch, a hacksaw, a drill press, and a rattle can of flat black paint, Arlen Ness was going for baroque. He gold-plated parts, adorned the aluminum fascia of drive-train elements with ornate engravings, and applied wild splashes of Peter Max-inspired color to the sheet metal. Plush, velour upholstery adorned his seats. If Arlen believed he could squeeze more than a single motor into a frame, he would. It was almost routine—at least for Arlen Ness—to cram two supercharged, Ironhead Sportster engines into a single frame where they would cuddle up to create ungodly heaps of horsepower.

These eccentric-seeking machines had been hallmarks of early 1970s chopper style. Ness was 1 of the very first builders to embrace the extravagant hippie counterculture that blossomed in the San Francisco Bay Region, a place Ness calls property. Some of his motorcycles from this period appear like psychedelic props from a Jefferson Airplane album cover, or as if King Louis XIV of France had commissioned an eighteenth-century, rococo rocket sled to go tooling about the Palace of Versailles. Ness combined “flower power” with horsepower to develop motorcycles that defined an era. He is nevertheless setting the pace for younger builders.

Experimental LOC Launch – 1

Image by jurvetson
You meet the most fascinating people at BALLS. Jim Green pours his own motor propellant. He machines custom motor casings, nozzle, and closures. Each and every of these is a potential point of failure. =)

Right here he is cutting the red “sparky” grains to increase their surface region (accelerating their burn). The red propellant contains a titanium sponge and Midas brake filings among other exciting components. We utilized a single of his green “Swamp Gas” grains instead of a delay charge.

On the flight out to Black Rock, I was reading the Apogee Components (RockSim) book on rocketry. Web page 131 reads:

Producing Rocket Motors
“NO!!! Never ever!!! Do not attempt to make your own rocket motors! Several individuals have died for the duration of attempts to make their personal rocket motors.”

So, I got Jim to sign the page in my book. =)

(Next)

Most current Custom Machined Components News

CustomMachiningcomponents.com Provides Good quality CNC Turning Components at Viable Prices
Shenzen, China — (ReleaseWire) — 09/04/2014 — Runsom Precision Co. Ltd. has lately created news right after launching an additional high quality service of its machined parts referred to as CNC turning parts. CNC or Computerized Numerical Handle is a manufacturing procedure&nbsp…
Study much more on DigitalJournal.com

Sennheiser&#39s exceptional Momentum headphones appear for a hat-trick with new in
Like the rest of the Momentum household, the new in-ear headphones are made to accentuate each style and higher performance, unloading uniquely styled cuts of higher-good quality components, along with a hearty helping of that famed Sennheiser sound. And at …
Read far more on Digital Trends

Rotary vs. Linear Indexing
SCARA robots, machine-vision systems and electrical testing can also be incorporated into rotary indexing systems. “System choice is not a formulaic approach, but in common, rotary systems are greatest for basic assemblies of eight components or less becoming …
Read far more on Assembly Magazine

Motorcyle enthusiast Custom Machined Parts

Motorcyle enthusiast Custom Machined Parts

CNC machined Items http://www.floydfolks.org & http://www.littlefamilyfarm.com 1-540-745-2322 floydlcfgroup@gmail PO box 179 Floyd,Virginia 24091 follow u…
Video Rating: 5 / five

Fitzpatrick Manufacturing Company is a custom CNC machine shop that tends to make the most complex components with ease thanks to a highly educated employees, state of the art…
Video Rating: five / 5

Most recent Custom Plastic Elements News

From the archive, 1993: How Apple gave birth to Newton
The pirate team created its very first custom chips and by the finish of 1989 assembled a plug-in Macintosh circuit board that could simulate some of the Newton&#39s operations. The group still hoped to create its first item in late … They tore out the …
Study much more on San Jose Mercury News

Pike County project that would hire 30 folks is approved for million in
$ 1.5 million and $ 250,000 in tax incentives for Fuel Total Systems of Lebanon for a $ 48.1 million expansion of its plastic tank and steel fuel filler pipe business manufacturing for the auto market. The expansion would generate 63 jobs earning an …
Read much more on Lexington Herald Leader

Investing in Custom 3D Printing

Investing in Custom 3D Printing
When owning a direct metal laser sintering machine isn&#39t an alternative, engineers, inventors, and hobbyists alike can turn to one business to have their precision components produced to order. More technically put, this company produces “fully functional metal components …
Study a lot more on Wealth Day-to-day

Talon Innovations Selected as Finalist for Minnesota Company Magazine Award
Talon leveraged its expertise and knowledge in precision machining and ultra-higher purity manufacturing to expand into manufacturing health-related device components and to serve other industries where precision and ultra high purity are crucial good results aspects.
Read much more on Virtual-Strategy Magazine (press release)

custom computer box metal component fabrication

custom computer box metal component fabrication

get in touch with Ray Chen at sales05@joinconn.com joinconn is a metal stampings manufacturer in China considering that 1998. Discover far more ,please visit www.joinconn.com for comput…

In a globe where mitered corners and flat patterns basically do not co-exist, there is a man destined to overcome. When other say it can’t be completed he alone sear…
Video Rating: four / five

Nice Custom Metal Components photos

Nice Custom Metal Components photos

Check out these custom metal components images:

Friendship

Image by Urban Woodswalker
I make necklaces out of used aluminum beverage cans. I wash them and then cut out the hands to make necklaces. These hands remind me of Mexican Milagros.

According to Wikipedia:
"Milagros (also known as ex-votos or dijes) are religious folk charms that are traditionally used for healing purposes and as votive offerings in Mexico, the southern United States, other areas of Latin America, as well as parts of the Iberian peninsula. They are frequently attached onto altars, shrines, and sacred objects found in places of worship, and they are often purchased in churches, cathedrals or from street vendors.

Milagros come in a variety of shapes and dimensions and are fabricated from many different materials, depending on local customs. For example, they might be nearly flat or fully three dimensional; and they can be constructed from gold, silver, tin, lead, wood, bone, or wax. In Spanish, the word milagro literally means miracle or surprise.

The use of milagros is a folk custom in parts of North, Central, and South America, and it is claimed that the custom is traceable to ancient Iberians who inhabited the coastal regions of Spain. The use of milagros accompanied the Spanish as they arrived in Central and South America. Although the custom is not as prevalent as it once was, the use of milagros or ex-votos continues to be a part of folk culture throughout rural areas of Spain—particularly Andalusia, Catalonia and Majorca.

As part of a religious ritual or an act of devotion, milagros can be offered to a symbol of a saint as a reminder of a petitioner’s particular need, or in gratitude for a prayer answered. They are used to assist in focusing attention towards a specific ailment, based on the type of charm used. Milagro symbolism is not univeral; a milagro of a body part, such as a leg, might be used as part of a prayer or vow for the improvement of a leg; or it might refer to a concept such as travel. Similarly, a heart might represent ideas as diverse as a heart condition, a romance, or any number of other interpretations.
Milagros are also carried for protection and good luck.

In addition to religious and ritual applications, milagros are often found as components in necklaces, earrings and other jewelry."

World PEACE

Image by Urban Woodswalker
I make necklaces out of used aluminum beverage cans. I wash them and then cut out the hands to make necklaces. These hands remind me of Mexican Milagros.

According to Wikipedia:
"Milagros (also known as ex-votos or dijes) are religious folk charms that are traditionally used for healing purposes and as votive offerings in Mexico, the southern United States, other areas of Latin America, as well as parts of the Iberian peninsula. They are frequently attached onto altars, shrines, and sacred objects found in places of worship, and they are often purchased in churches, cathedrals or from street vendors.

Milagros come in a variety of shapes and dimensions and are fabricated from many different materials, depending on local customs. For example, they might be nearly flat or fully three dimensional; and they can be constructed from gold, silver, tin, lead, wood, bone, or wax. In Spanish, the word milagro literally means miracle or surprise.

The use of milagros is a folk custom in parts of North, Central, and South America, and it is claimed that the custom is traceable to ancient Iberians who inhabited the coastal regions of Spain. The use of milagros accompanied the Spanish as they arrived in Central and South America. Although the custom is not as prevalent as it once was, the use of milagros or ex-votos continues to be a part of folk culture throughout rural areas of Spain—particularly Andalusia, Catalonia and Majorca.

As part of a religious ritual or an act of devotion, milagros can be offered to a symbol of a saint as a reminder of a petitioner’s particular need, or in gratitude for a prayer answered. They are used to assist in focusing attention towards a specific ailment, based on the type of charm used. Milagro symbolism is not univeral; a milagro of a body part, such as a leg, might be used as part of a prayer or vow for the improvement of a leg; or it might refer to a concept such as travel. Similarly, a heart might represent ideas as diverse as a heart condition, a romance, or any number of other interpretations. Milagros are also carried for protection and good luck.

In addition to religious and ritual applications, milagros are often found as components in necklaces, earrings and other jewelry."

Nice Custom China Machined Components photos

Nice Custom China Machined Components photos

Check out these custom machined components China images:

M2HB Ammo Box and Spade Grips Articles

Image by enigmabadger
Showcasing two fun components of the new BrickArms M2HB China Machine Gun. What I really like is how Will incorporated not only a ton of detail into each, but includes more than a few ways for each part to connect to other parts.

Arlen Ness’ Untitled

Image by cliff1066™
People in the know call Arlen Ness “Godfather,” not because he makes offers you can’t refuse, but as a sign of respect for his accomplishments throughout a long and storied career. He is the patriarch of the custom motorcycle industry.

Back in “the day,” circa 1970 BC (Before Catalogs), when choppers were still the homespun products of some local dude with a torch, a hacksaw, a drill press, and a rattle can of flat black paint, Arlen Ness was going for baroque. He gold-plated parts, adorned the aluminum fascia of drive-train components with ornate engravings, and applied wild splashes of Peter Max-inspired color to the sheet metal. Plush, velour upholstery adorned his seats. If Arlen thought he could squeeze more than one motor into a frame, he would. It was nearly routine—at least for Arlen Ness—to cram two supercharged, Ironhead Sportster engines into a single frame where they would cuddle up to produce ungodly heaps of horsepower.

These eccentric-looking machines were hallmarks of early 1970s chopper style. Ness was one of the first builders to embrace the extravagant hippie counterculture that blossomed in the San Francisco Bay Area, a place Ness calls home. Some of his motorcycles from this period look like psychedelic props from a Jefferson Airplane album cover, or as if King Louis XIV of France had commissioned an eighteenth-century, rococo rocket sled to go tooling around the Palace of Versailles. Ness combined “flower power” with horsepower to create motorcycles that defined an era. He is still setting the pace for younger builders.

Boeing 747-400, Lufthansa, D-ABVM, landing on Runway 19 L. SFO. 747

Image by wbaiv
Lufthansa 747-400, having landed safely, going basically South by South-west down Runway 19 L, at SFO. Thrust reversers are operating. All the way from Germany, possibly, or possibly they cleared customs in Chicago, or Toronto, re-boarded and now here they are. Or arrived from the mysterious West- Japan, China, Singapore, Australia, etc.

Its tricky, the shorter runways that seem to be athwart the Bay, well, they’re Runways 19 (coming in from the East Bay) and Runways 1 (O-N-E) coming from the Peninsula and over the BART station before landing. So
013 magnetic, 027 true and
193 magnetic, 207 true. Again, 27 degrees off a true North – South play. North by North-east for "1" and South by South-West for "19". That’s pretty counter intuitive.

And the runway that’s parallel to to the Bay, more or less, is runways 28 L & R going toward San Bruno Mountain, 10 L & R heading down to the San Mateo Bridge. It seems like it should be North and South, but those are unadjusted magnetic headings, not aligned to True North, so they turn out to be
103 magnetic, 117 true
283 magnetic, 297 true, 27 real degrees away from real East and West. More like West by North-west and East by South-east. So there’s some North/South component, but they’re really more E-W than N-S.

And it explains why the sun isn’t shining straight onto the side of planes taking off on runways 28 L or R- They’re pointed West of North-west. On the Solstice, that’s only 4 degrees north of straight into the sunset!

_34_0035_c
Cropped and centered.