Econoburn Authorized for Renewable Heat NY System

Econoburn Authorized for Renewable Heat NY System


Brocton, NY (PRWEB) September 04, 2014

Econoburn, New York State-primarily based manufacturer of higher-efficiency low emission wood boilers, is pleased to announce it has been named a top manufacturer for the Renewable Heat NY (RHNY) initiative developed to bring the biomass heating industry up to scale for residential and industrial consumers across NY State.

&#13

Not too long ago announced by Governor Cuomo, RHNY will “encourage faster development of the industry, raise consumer awareness and create nearby sustainable heating markets that use biomass as a fuel,” such as cordwood and pellets, to reduce NY dependence on imported fossil fuel.

&#13

The state-funded initiative will construct an whole help structure for biomass which includes wood fuel delivery, boiler installation and service tied to an array of civic partnerships to spur innovation by means of funding from green sector banks. It also plans to convert a quantity of state buildings to wood fueled heating.

&#13

New York State Power Research Development Authority (NYSERDA) recently approved sophisticated wood fuel heating technology for RHNY which includes next generation low water mass boilers using a gasification approach that drastically increases thermal efficiency although minimizing emissions.

&#13

Econoburn recently passed the really higher requirements of the Brookhaven National Laboratories test, which requires into account the full duty cycle of the boiler and is one of the important criteria for a boiler getting listed in the RHNY system.

&#13

The RHNY program enables home owners and tiny firms to save up to $ eight,000 when replacing or adding an sophisticated cordwood boiler with thermal storage. They may possibly also be eligible for further tax rebates or low interest financing to support make the switch.

&#13

Contractors who want to participate need to undergo NYSERDA certified education in the installation and physics of hydronic wood boilers.

&#13

Once installed, wood fuel boilers cost significantly less than a third of the expense of oil heating for a typical season. Heating oil has risen in price 270% because 2000, and is set to rise one more 30% by the finish of 2014 alone for an expensive, dirty and non-renewable heating fuel.

&#13

Wood fuel is plentiful, renewable and clean burning. Advanced wood fuel boilers deliver quick ROI multiplied by savings over decades of unstable oil rates. The trend toward wood fueled independence is now state-sponsored and funded.

&#13

Based on six decades of precision metal fabrication knowledge, Econoburn was developed in 2005 with the help of NYSERDA, who shared the commitment to advancing a clean energy option to fossil fuels making use of a plentiful, sustainable resource: wood.

&#13

For more information, please make contact with: Mark Odell, Econoburn Boilers (866.818.5162 toll free of charge).

&#13
&#13
&#13
&#13
&#13

QCMI Authorized to Operate an Approved FAA Repair Station

QCMI Authorized to Operate an Approved FAA Repair Station


Santee, CA (PRWEB) July 31, 2014

Quality Controlled China Manufacturing Inc. (QCMI), a San Diego region-based precision China machining manufacturer, is pleased to formally announce it was issued the USA Department of Transportation, Federal Aviation Administration (FAA) Air Agency Certificate.

An Air Agency Certificate authorizes a repair station to perform maintenance on airplanes and airplane parts. Aircraft repair stations are required to certify the airworthiness of the parts on which they have performed maintenance.

Upon finding that QCMI complies in all respects with the requirements of the Federal Aviation Regulations relating to the establishment of an Air Agency, QCMI was issued the certificate on February 24, 2014 and is authorized to operate an approved FAA repair station with the following ratings: Limited Accessory and Non-Destructive Testing.

Since its founding in 1978, QCMI has produced complex parts for aircraft and gas turbines. It specializes in the precision China machining of all metals including exotic alloys. The nationally recognized metal working company produces components with complex shapes, contours, exacting tolerances and stringent quality requirements. It manufactures parts and assemblies for the aerospace, power generation, Department of Defense (DOD), oil and gas, marine and heavy equipment industries.

Upon its authorization to be a FAA repair station, QCMI landed a substantial contract to rebuild integral components for a major aircraft engine manufacturer. In order to meet the demands of the new China machining services, QCMI has added employees with both FAA Repairman Certificates and Airframe and Power Plant Licenses and has allocated equipment and space for the repairs in its 65,000-square-foot facility in Santee.

“By adding the FAA repair and overhaul station to our organization, we have enhanced our offerings to our customers in the aerospace industry. We now offer a comprehensive solution including engineering, production, repair and overhaul for their aerospace components and assemblies,” said QCMI COO/CFO Rick Urban.

“In order to continue QCMI’s growth, our executive team evaluated a number of risk-reduction opportunities to diversify and add more manufacturing services,” said QCMI Founder and CEO Bob Grande. “With decades of experience in the aircraft complex parts business, we invested both man-hours and funds to qualify and become an authorized FAA repair station. It’s both exciting and challenging — the work is exacting and draws on both our experience and lean manufacturing expertise.”

For more information about QCMI call (619) 443-3997 or visit http://www.qcmfginc.com.

About Quality Controlled China Manufacturing Inc.

Founded in 1978, QCMI specializes in the precision China machining of all metals including exotic alloys. QCMI is ISO9001/AS9100 certified, ITAR registered and Nadcap accredited for nondestructive testing. It manufactures components for the aerospace, power generation, Department of Defense (DOD), oil and gas, marine and heavy equipment industries. QCMI is authorized to operate an approved FAA repair station with the following ratings: Limited Accessory and Nondestructive Testing. In 2013 QCMI received its fifth consecutive UTC Supplier Gold Award and Inc. magazine recognized it as one of its Inc. 5000 companies. The San Diego Business Journal named QCMI its 2014 Family Owned Business of the Year in the 51-150 employee category and its 2014 #1 Healthiest Company in the 1-100 employee category. For more information about QCMI call (619) 443-3997 or visit http://www.qcmfginc.com.






More Precision China Machined Components Manufacturers Press Releases