Handrail Jog

A handful of good cnc engineering solutions images I located:

Handrail Jog
cnc engineering services
Image by Caliper Studio
Center stringer comfort stair connects two workplace floors in Starret Lehigh creating. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer form a continuous ribbon. 1 1/4&quot diameter handrail posts are continuous bent &quotC&quot shapes that wrap around treds and are welded to stringer. Stair was delivered to web site in 1 piece [24′ lengthy 3′ wide 3′ tall @ 2000lbs. Glass is two 1/two&quot layers of low iron tempered glass with PVB interlayer. Each and every panel is a 148.375&quotx41.25&quot rectangle that weighs 522lbs. Cut out in concrete floor is trimmed with a box of 1/2&quot thick blackened steel that was fully prewelded in the shop. The box picks up the load at top of stair and serves as a custom base shoe for the glass.

Design and style by Diller Scofidio + Renfro

Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan &amp partners for engineering solutions.

Nice Precision Engineering China images

A few nice precision engineering china photos I located:

Steven F. Udvar-Hazy Center: B-29 Superfortress “Enola Gay” panorama
precision engineering china
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Globe War II and the first bomber to residence its crew in pressurized compartments. Although created to fight in the European theater, the B-29 found its niche on the other side of the globe. In the Pacific, B-29s delivered a range of aerial weapons: traditional bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the initial atomic weapon used in combat on Hiroshima, Japan. Three days later, Bockscar (on display at the U.S. Air Force Museum close to Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Excellent Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft six five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Materials:
Polished overall aluminum finish

Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and higher-aspect ratio wings. Polished aluminum finish all round, standard late-Planet War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on reduced left nose.

Got a Life (and As well Significantly Money)? The 2017 McLaren 570S Is for You

Got a Life (and Also Considerably Cash)? The 2017 McLaren 570S Is for You
Energy, precision, poise, prestige, practicality—pick two or three and be content. But as I drove outside Geneva final week, past … Like that early car, it is the item of McLaren&#39s remote, super-higher-security investigation lab in England, but this is the …
Study much more on Bloomberg

HTC Vive VS Oculus Rift VS PlayStation VR: Steam will be open to non-Vive VR
VR is also incredibly expensive to create, requiring both higher-powered internal hardware and sophisticated lenses and displays, neither of which the business has a particular pedigree in. What the … Nevertheless, the fields with the highest proportional …
Read a lot more on IT PRO

Day 104 – C is for Pc

Some cool cnc engineering photos:

Day 104 – C is for Pc
cnc engineering
Image by Dave77459
My function and interests have revolved around computer systems practically all my life. Since playing with the school’s TRS-80 in 1980 ’til right now, I have been around, inside, and out of computer systems.

My family bought a VIC 20 very early, then a Commodore-64 for Christmas ’82. I began programming it in Standard, but quickly I moved on to 6502 assembly language. In 1983, I got a Timex Sinclair 1000, and I spent nights and late nights finding out z80 assembler.

By day, I played with the earliest IBM PCs at MSU. I chanced to find a C compiler, and taught myself K &amp R C. I also excelled in FORTRAN mine was the last class to find out by using punch cards. Soon after that, they utilised amber terminals to run the Cyber 750 mainframe.

By the time I got into grad college, I knew much more about programming than any other student in Civil Engineering at MSU. I became well-known for altering the statistical evaluation package, by adding the potential to save and restore information! Believe it or not, till I made the change, each one particular re-keyed their information sets. In a glimpse of my future goodness, I let my fellow students use my version (rather than taking benefit of the enhanced program at their expense).

I could go on and on. As an engineer, I’ve usually utilized computers. I’ve written regional travel demand models (e.g., predicting all the site visitors in 2020 for the Washington DC region), written airport simulations, carried out contract programming of embedded systems, been the IT guy, and even accomplished classified stuff that I nevertheless cannot truly speak about (for a time, I was export controlled).

Hell, I had an email address before making use of an @ sign was frequent. Any individual else right here keep in mind UUCP-style addresses? dave!cnc!uunet … ahh, the poor old days.

I guess by now you realize that computer systems have played a big part in my life.

This is my one particular hundred fourth photo for 365 Days and my third photo for An Alphabet of Life.

three March 2007

Notes:

This photo was inspired by Cécile’s My sleepless nights in Tokyo. I am gonna try once more for a better work.

Meanwhile, this a single produced a couple technical challenges. 1st, how do I let you know that the glow is from the pc? Just shooting the personal computer would glow my face, but the laptop would be entirely dark. The other challenge in shots like this is how to get the camera to concentrate on my face in truly dim light. I solved both with a book light.

I shined the book light on my face to concentrate, and employed the 2 second delay on my IR remote. When the warning light came on the camera confirming a concentrate, I slid the book light beneath the table and shone it up via a mylar sheet to illuminate the laptop. I attempted utilizing my halogen lamp to bottom light, but it is far too vibrant.

Behind the scenes photographs right here and here (adjacent in my stream).

I am positive a person could excellent this shot, but meanwhile I am proud of it.

Newest China Prototyping Manufacturing News

Sort A Machines Introduces New Matte Finish ProMatte 3D Printing Filament
3dp_ProMate_variety_a_machines_logo California-based 3D printer manufacturer Variety A Machines is releasing a new 3D printing polymer filament particularly formulated to create lightweight, smooth and workable prints with a matte finish. ProMatte is the&nbsp…
Study more on 3DPrint.com

Earnings Watch
As a result of Republic&#39s chapter 11 filing and “related exposures from monetary guarantee obligations, the business&#39s fourth quarter benefits include a total provision of BRL390.6 million related to these obligations,” said Embraer. “Actual … Chief …
Read more on Wall Street Journal

The Week In Assessment: Style/IoT
Synopsys acquired WinterLogic, provider of fault simulation tools utilised in automotive, safety and security environments for the design and style and verification of advanced SoCs. In announcing the deal, Synopsys highlighted fault simulation as crucial for ISO 26262&nbsp…
Study much more on SemiEngineering

Biomaterials hub may hatch here
It has now constructed up its infrastructure so it can supply all sorts of assistance for market like style, testing, prototyping, instruction, feasibility assessment and project management around the development of composite-material deployment. At its …
Read much more on Winnipeg Free Press

ZTE, China Mobile unveil 5G high-frequency prototype

Flanker Plus
china prototype
Image by Fotografik33 – www.fotografik33.com
www.fotografik33.com
Démonstration du Soukhoi Su 35 au salon du Bourget.
Le Soukhoï Su-35 (Flanker Plus dans le code OTAN) est un chasseur russe. Il a été créé dans le but d’accroître les capacités offensives du Su-27 et de lui donner la possibilité de détruire tant les cibles aériennes que de surface.
Le Su-35 est le premier chasseur au monde à avoir deux radars, un N-011 multimode à balayage électronique à l’avant et un N-012 dans le cône de queue. Le N-011 est capable d’acquérir 15 cibles et d’en engager eight, sa portée est de plus de one hundred km pour un objectif d’une SER de ,01 m2.

Sukhoi Su35 demonstration at Paris Air Show &quotLe Bourget&quot.
The Sukhoi Su-35 (Russian: Сухой Су-35 NATO reporting name: Flanker-E) is designation of two different heavily-upgraded derivatives of the Su-27 ‘Flanker’. Both are single-seat, twin-engine supermaneuverable multirole fighters, developed by Sukhoi and built by Komsomolsk-on-Amur Aircraft Production Association (KnAAPO).
The initial variant was created in the course of the 1980s, when Sukhoi was looking to upgrade its higher-efficiency Su-27, and was initially known as the Su-27M. Later re-designated Su-35, this derivative incorporates aerodynamic refinements to enhance manoeuvrability, enhanced avionics, longer variety, and a a lot more potent engine. The initial Su-35 prototype, converted from a Su-27, produced its maiden flight in June 1988. A lot more than a dozen of these were built with some employed by the Russian Knights aerobatic demonstration group. The 1st Su-35 design and style was later modified into the Su-37 with thrust-vectoring engines and utilised as a technologies demonstrator. A sole Su-35UB two-seat trainer was built in the late 1990s that, despite its name, shares a powerful resemblance to the Su-30MK loved ones.
In 2003, Sukhoi embarked on a second modernization of the Su-27 to make what the firm calls a 4++ generation fighter that would serve as an interim fighter prior to the arrival of the Sukhoi PAK FA. This derivative incorporates a reinforced airframe, improved avionics and radar, thrust-vectoring engines, and a reduced radar signature from the front, although omitting the canards and air brake. In 2008 the revamped variant, erroneously dubbed the Su-35BM by the media, began its flight test programme that involved four prototypes, one of which was lost in 2009.
The Russian Air Force has ordered 48 production units, designated Su-35S, of the newly-revamped Su-35. Each Su-35 models have been provided to numerous nations, such as Brazil, China, India and South Korea, but so far have not attracted any export orders. Sukhoi initially projected that it would export much more than 160 units of the second modernized Su-35 worldwide.

ZTE, China Mobile unveil 5G higher-frequency prototype
BARCELONA, Spain – Chinese vendor ZTE, together with compatriot telecom operator China Mobile, announced a “5G” high-frequency prototype. “The ZTE-created prototype operates on a 15-gigahertz carrier with a bandwidth of 500 megabits and&nbsp…
Study much more on RCR Wireless News

ZTE, China Mobile unveil 5G prototype, network architecture
ZTE and its partner China Mobile have officially announced their newest 5G high-frequency prototype and demonstrated ten Gbps+ higher bitrate, beam-tracking, and other essential 5G technologies. China Mobile and ZTE have also introduced a 5G-oriented future&nbsp…
Read a lot more on Telecompaper (subscription)

China&#39s Y-20 transport aircraft may possibly enter service in 2016
The appearance on Chinese military webpages of the fifth prototype of the Xian Aircraft Corporation (XAC) Y-20 heavy strategic transport aircraft has prompted suggests that it could enter Men and women&#39s Liberation Army Air Force (PLAAF) service as early as …
Study more on IHS Jane’s 360

Most recent Die Casting China News

Die Casting Machines Business 2016 Global and China Market place Analysis Report
The &#39Global and Chinese Die Casting Machines Industry, 2011-2021 Marketplace Investigation Report&#39 is a expert and in-depth study on the present state of the worldwide Die Casting Machines market with a focus on the Chinese market place. The report gives key&nbsp…
Read more on NewsMaker (press release)

Why Romney Fired on Fort Trumpter
In praising the letter, Max Boot, the Jeane J. Kirkpatrick fellow at the Council on Foreign Relations, wrote in Commentary magazine that Trump is “emerging as the quantity one threat to American security”— even larger than ISIL or China. The second line …
Read a lot more on POLITICO Magazine

The Allure of Adventure and Travel Tv, and How You Can Take Element
… reality tv enables audiences to discover the world. It adds drama when necessary by means of casting distinct personalities with each other, upping the stakes with physical and mental competitors, or just letting audiences live vicariously via the …
Read more on Huffington Post

Cool Rapid Prototype China photos

Check out these fast prototype china photos:

Steven F. Udvar-Hazy Center: main hall panorama (SR-71, Space Shuttle, et al)
rapid prototype china
Image by Chris Devers
See far more photos of this, and the Wikipedia write-up.

Specifics, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in much more hostile airspace or with such total impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s functionality and operational achievements placed it at the pinnacle of aviation technology developments throughout the Cold War.

This Blackbird accrued about two,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March six, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, four minutes, and 20 seconds, averaging three,418 kilometers (two,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane more than to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. &quotKelly&quot Johnson

Date:
1964

Nation of Origin:
United States of America

Dimensions:
General: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (five.638m x 32.741m x 16.942m)

Components:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft airframe constructed largley of titanium and its alloys vertical tail fins are constructed of a composite (laminated plastic-sort material) to minimize radar cross-section Pratt and Whitney J58 (JT11D-20B) turbojet engines function massive inlet shock cones.

• • • • •

See far more pictures of this, and the Wikipedia write-up.

Particulars, quoting from Smithsonian National Air and Space Museum | Space Shuttle Enterprise:

Manufacturer:
Rockwell International Corporation

Country of Origin:
United States of America

Dimensions:
Overall: 57 ft. tall x 122 ft. extended x 78 ft. wing span, 150,000 lb.
(1737.36 x 3718.57 x 2377.44cm, 68039.6kg)

Components:
Aluminum airframe and physique with some fiberglass features payload bay doors are graphite epoxy composite thermal tiles are simulated (polyurethane foam) except for test samples of actual tiles and thermal blankets.

The initial Space Shuttle orbiter, &quotEnterprise,&quot is a full-scale test vehicle utilized for flights in the atmosphere and tests on the ground it is not equipped for spaceflight. Though the airframe and flight handle elements are like those of the Shuttles flown in space, this automobile has no propulsion system and only simulated thermal tiles because these attributes have been not necessary for atmospheric and ground tests. &quotEnterprise&quot was rolled out at Rockwell International’s assembly facility in Palmdale, California, in 1976. In 1977, it entered service for a nine-month-long approach-and-landing test flight plan. Thereafter it was employed for vibration tests and match checks at NASA centers, and it also appeared in the 1983 Paris Air Show and the 1984 World’s Fair in New Orleans. In 1985, NASA transferred &quotEnterprise&quot to the Smithsonian Institution’s National Air and Space Museum.

Transferred from National Aeronautics and Space Administration

Most current Precision Engineering China News

Obtaining it Right by Receiving it Wrong: RepRap and the Evolution of 3D Printing
All current engineering production generates goods in an arithmetic progression. At times this is very quickly − suppose an injection … This lead to early style selections including the use of the dreaded, threaded-rod frame, and an emphasis on …
Read much more on Hackaday

Israeli Metal 3D Printing XJet Raises Additional Million
The funding round was led by the Catalyst CEL Fund, an Israeli-Chinese private equity fund and Autodesk, Inc., a leader in 3D design and style engineering and entertainment application, by way of its Spark Investment Fund, as effectively as other existing shareholders. XJet …
Read more on Jewish Business News

Obama&#39s Hawk: The Weird, Dangerous World of Robert Function
Perform&#39s Holy Grail as he grapples with a severely constrained military spending budget is locating an efficient “Third Offset Strategy” capable of staying at least two steps ahead of the 5 significant enemies Function identifies on his 4-dimensional chessboard: China …
Study a lot more on The National Interest On the web (blog)